gns3wireshark
I am trying to capture packets with GNS3 using wireshark but wireshark is giving error message every time I run wireshark in GNS3. Path for Wireshark is "D:\Wireshark\Wireshark.exe". Same Path I mentioned in Packet capture analysis command. Screen shot od error message is attacked below:
I managed to show them (as UPD protocol packets) by disabling the Vimba GigE Vision Filter Driver, thanks to the answers in the rest of this post.
The RST flag is at the bit representing the number 4 within this byte
refers to the numerical value of bit 2 (22 = 4) - the bits are numbered 76543210 from MSB to LSB with the numerical values 128, 64, 32, 16, 8, 4, 2, 1.
In the same manner, URG is bit 5 and 25 = 32.
Best Answer
Check the location of your Wireshark install , make sure it is like
tail.exe -f -c +0b %c | "D:\Wireshark\Wireshark.exe" -k -i - ,for your case. may you need also to shut down your windows firewall