Accessing IBM IMM settings from Windows

As of ASU (Advanced Settings Utility) version 82k/9.50, out-of-band communication to blade IMMs is supported.

Here is an excerpt from pages 83-84 of the ASU user manual (http://download.boulder.ibm.com/ibmdl/pub/systems/support/system_x_pdf/ibm_util_asu_asu82k_anyos_noarch.pdf):

OOB Configuration for blades on AMM

ASU supports the configuration of blade settings through the out-of-band (OOB) mode. This section describes how to use it to configure blades on AMM.

The OOB configuration is designed to configure settings of blades on AMM. Before you use this function, ensure that the following requirements are met:

• The remote blades on AMM are connected to your network environment.
• The blade is an IMM-based server.
• Add the --slot argument to force ASU to connect with the remote AMM. If not, ASU will try to establish a connection with the provided IP address in an IMM out-of-band mode by default. And the --slot argument also can identify the blade's IMM node bay.

• Add the --host, --user and --password connectivity options because it is on out-of-band mode.

  – --host provides the IP address of the remote AMM where the blade is.

  – --user and --password authenticate to the AMM.

Command Examples:

To show a remote blade UEFI setting: asu show uefi --host x.x.x.x --user xxx --password xxx --slot x

To set a remote blade setting: asu set SETTING_NAME xxx --host x.x.x.x --user xxx --password --slot x --port 6090

In the examples, --host x.x.x.x is the IP address of the remote AMM, --user xxx and --password xxx are used to authenticate the connection, --slot x refers to the IMM node bay of the blade, and --port provides the port number for AMM chassis interface; the default is 6090.

The commands supported by OOB configuration for blades on AMM are listed below.

Command           Description

show              Display IMM server setting
set               Update IMM server setting
showdefault       Display IMM default server setting
showvalues        Display IMM values server setting
showgroups        Display IMM setting for server groups
batch             Execute several ASU commands simultaneously
createuuid        Generate a UUID value and set it
comparedefault    Compare the default value with the current value
delete            Delete an instance of a setting
help              Show description for selected settings
loaddefault       Load the default value
replicate         Replicate settings saved in a settings file
restore           Restore settings saved in a settings file
save              Save all or some settings to a settings file
setenc            Apply an encrypted value to a setting

Here is the list of ports you need to have open.

Edit: Do the normal network problem debugging. Can you ping the server? Does tcptraceroute to the appropriate port work OK? Can you telnet to the appropriate port?

If RC works over LAN but does not remotely it does look like a networking issue.