We have a pair of MSA60's connected to two different servers. Today I ran a diagnostic report via the HP Array Configuration utility in order to obtain the serial numbers of the devices.
Now that that has ran, all of the drives in the devices have their blue UID LED lit. I can't see anywhere in the config utility where that can be turned off, nor do I know why they became lit after the diagnostics.
There are no system faults or alerts on either system.
I don't have too much experience with these guys, as they've been inherited with this client.
I was unable to find an answer in the manual, or via searching the web.
Thank you for any help!
Best Answer
When you're in the ACU, the blue LEDs light up for whatever drives you've got selected in the tree on the left side.
This allows you to quickly see which drives are part of an array, or volume.
Closing the ACU will reset the lights back to their default OFF state.