Can’t get an IBM xSeries 345 server to load Windows Server 2003 using ServerGuide utility

ibmibm-xseries

I have a client that has an IBM xSeries 345 eServer. Per the IBM support website, I have downloaded the ServerGuide Setup 7.4.17 installation ISO and burned a bootable CD. The CD boots fine and loads the utility. I walk through the following screens without any issue:

  1. Set the date and Time
  2. Detect the IBM ServeRAID card and install the latest firmware
  3. Clear the hard disks
  4. Set up the RAID array

The next step is format the NOS partition. I select my partition size and the utility goes through the following steps:

  1. Creating NOS partition
  2. Formatting NOS partition (NTFS)
  3. Copying W32 files

The copying W32 files takes about 10 minutes. I see the CD drive and disks working hard. When the copying is complete, I'm taken to a blank page just NOS Partitioning at the top. At the bottom of the screen are the familiar Back and Exit buttons. I see the place where the Next button should be, and if I click on it I can tell there is something there, but the space is empty. No button is displayed and clicking the empty spot doesn't ever take me to the next screen.

I can't load the OS until I get past this part. I have already tried:

  1. Burning multiple copies and versions of the ServerGuide CD
  2. Letting the final screen just sit there over the weekend thinking it might advance after syncing the drives or something

Has anybody else seen this? I'm really at a loss here.

EDIT: I found another person who has the exact same problem as me: http://www.ibm.com/developerworks/forums/thread.jspa?messageID=14451763

Best Answer

I just had problems setting up an IBM x346 server 2 days ago so perhaps my experience will be helpful.

I found the 2 key elements to do were:

1) Upgrade the server bios (there are downloadable files on IBM's site - including one that works off a CD since getting a boot floppy is hard work these days :-) )

2) If your machine has an IBM RAID controller, also update the BIOS on it.

I did both of these things and after that it worked like a charm.

Mind you, I was installing Win7 Pro (!) which worked, much to my amazement.

Good luck.

Related Topic