I have Centos 7 and next installed packages:
[root@centos7 pam.d]# rpm -qa|grep ldap
nss-pam-ldapd-0.8.13-8.el7.x86_64
openldap-2.4.44-5.el7.x86_64
openldap-clients-2.4.44-5.el7.x86_64
My configs:
/etc/nslcd.conf:
uid nslcd
gid ldap
uri ldap://<my_ldap_server_ip>
base dc=company,dc=org
binddn cn=proxy,ou=users,dc=company,dc=org
bindpw <bind_pw>
nss_initgroups_ignoreusers root,nslcd
nss_min_uid 10000
filter passwd (objectClass=posixAccount)
base passwd ou=users,dc=company,dc=org
base shadow ou=users,dc=company,dc=org
base group ou=groups,dc=company,dc=org
scope passwd one
scope shadow one
scope group one
map group member uniqueMember
ssl start_tls
TLS_REQCERT allow
tls_cacertdir /etc/openldap/cacerts
/etc/nsswitch:
. . .
passwd: files sss ldap
shadow: files sss ldap
group: files sss ldap
. . .
/etc/pam.d/:
[root@centos7 pam.d]# ls -lah password-auth system-auth
lrwxrwxrwx. 1 root root 16 Aug 22 18:53 password-auth -> password-auth-ac
lrwxrwxrwx. 1 root root 14 Aug 22 18:53 system-auth -> system-auth-ac
/etc/pam.d/password-auth:
#%PAM-1.0
# This file is auto-generated.
# User changes will be destroyed the next time authconfig is run.
auth required pam_env.so
auth required pam_faildelay.so delay=2000000
auth sufficient pam_unix.so nullok try_first_pass
auth requisite pam_succeed_if.so uid >= 1000 quiet_success
auth sufficient pam_ldap.so use_first_pass
auth required pam_deny.so
account required pam_unix.so broken_shadow
account sufficient pam_localuser.so
account sufficient pam_succeed_if.so uid < 1000 quiet
account [default=bad success=ok user_unknown=ignore] pam_ldap.so
account required pam_permit.so
password required pam_deny.so
password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=
password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok
password sufficient pam_ldap.so use_authtok
password required pam_deny.so
session optional pam_keyinit.so revoke
session required pam_limits.so
-session optional pam_systemd.so
session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid
session required pam_unix.so
session optional pam_ldap.so
password required pam_deny.so
/etc/system-auth:
#%PAM-1.0
# This file is auto-generated.
# User changes will be destroyed the next time authconfig is run.
auth required pam_env.so
auth required pam_faildelay.so delay=2000000
auth sufficient pam_unix.so nullok try_first_pass
auth requisite pam_succeed_if.so uid >= 1000 quiet_success
auth sufficient pam_ldap.so use_first_pass
auth required pam_deny.so
account required pam_unix.so broken_shadow
account sufficient pam_localuser.so
account sufficient pam_succeed_if.so uid < 1000 quiet
account [default=bad success=ok user_unknown=ignore] pam_ldap.so
account required pam_permit.so
password required pam_deny.so
password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=
password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok
password sufficient pam_ldap.so use_authtok
password required pam_deny.so
session optional pam_keyinit.so revoke
session required pam_limits.so
-session optional pam_systemd.so
session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid
session required pam_unix.so
session optional pam_ldap.so
password required pam_deny.so
When I'm doing 'su – ldapuser' I've entered.
But from ssh/console I can't login.
nslcd -d:
nslcd: [e2a9e3] DEBUG: connection from pid=4867 uid=0 gid=0
nslcd: [e2a9e3] <passwd="ldapuser"> DEBUG: myldap_search(base="ou=users,dc=company,dc=org", filter="(&(objectClass=posixAccount)(uid=ldapuser))")
nslcd: [e2a9e3] <passwd="ldapuser"> DEBUG: ldap_result(): cn=ldapuser,ou=users,dc=company,dc=org
nslcd: [e2a9e3] <passwd="ldapuser"> DEBUG: ldap_result(): end of results (1 total)
nslcd: [45e146] DEBUG: connection from pid=4867 uid=0 gid=0
nslcd: [45e146] <passwd="ldapuser"> DEBUG: myldap_search(base="ou=users,dc=company,dc=org", filter="(&(objectClass=posixAccount)(uid=ldapuser))")
nslcd: [45e146] <passwd="ldapuser"> DEBUG: ldap_result(): cn=ldapuser,ou=users,dc=company,dc=org
nslcd: [45e146] <passwd="ldapuser"> DEBUG: ldap_result(): end of results (1 total)
nslcd: [5f007c] DEBUG: connection from pid=4867 uid=0 gid=0
nslcd: [5f007c] <passwd="ldapuser"> DEBUG: myldap_search(base="ou=users,dc=company,dc=org", filter="(&(objectClass=posixAccount)(uid=ldapuser))")
nslcd: [5f007c] <passwd="ldapuser"> DEBUG: ldap_result(): cn=ldapuser,ou=users,dc=company,dc=org
nslcd: [5f007c] <passwd="ldapuser"> DEBUG: ldap_result(): end of results (1 total)
nslcd: [d062c2] DEBUG: connection from pid=4867 uid=0 gid=0
nslcd: [d062c2] <passwd="ldapuser"> DEBUG: myldap_search(base="ou=users,dc=company,dc=org", filter="(&(objectClass=posixAccount)(uid=ldapuser))")
nslcd: [d062c2] <passwd="ldapuser"> DEBUG: ldap_result(): cn=ldapuser,ou=users,dc=company,dc=org
nslcd: [d062c2] <passwd="ldapuser"> DEBUG: ldap_result(): end of results (1 total)
nslcd: [200854] DEBUG: connection from pid=4867 uid=0 gid=0
nslcd: [200854] <authc="ldapuser"> DEBUG: nslcd_pam_authc("ldapuser","sshd","***")
nslcd: [200854] <authc="ldapuser"> DEBUG: myldap_search(base="ou=users,dc=company,dc=org", filter="(&(objectClass=posixAccount)(uid=ldapuser))")
nslcd: [200854] <authc="ldapuser"> DEBUG: ldap_result(): cn=ldapuser,ou=users,dc=company,dc=org
nslcd: [200854] <authc="ldapuser"> DEBUG: myldap_search(base="cn=ldapuser,ou=users,dc=company,dc=org", filter="(objectClass=*)")
nslcd: [200854] <authc="ldapuser"> DEBUG: ldap_initialize(ldap://<my_ldap_server_ip>)
nslcd: [200854] <authc="ldapuser"> DEBUG: ldap_set_rebind_proc()
nslcd: [200854] <authc="ldapuser"> DEBUG: ldap_set_option(LDAP_OPT_PROTOCOL_VERSION,3)
nslcd: [200854] <authc="ldapuser"> DEBUG: ldap_set_option(LDAP_OPT_DEREF,0)
nslcd: [200854] <authc="ldapuser"> DEBUG: ldap_set_option(LDAP_OPT_TIMELIMIT,30)
nslcd: [200854] <authc="ldapuser"> DEBUG: ldap_set_option(LDAP_OPT_TIMEOUT,30)
nslcd: [200854] <authc="ldapuser"> DEBUG: ldap_set_option(LDAP_OPT_NETWORK_TIMEOUT,30)
nslcd: [200854] <authc="ldapuser"> DEBUG: ldap_set_option(LDAP_OPT_REFERRALS,LDAP_OPT_ON)
nslcd: [200854] <authc="ldapuser"> DEBUG: ldap_set_option(LDAP_OPT_RESTART,LDAP_OPT_ON)
nslcd: [200854] <authc="ldapuser"> DEBUG: ldap_start_tls_s()
nslcd: [200854] <authc="ldapuser"> DEBUG: set_socket_timeout(30,500000)
nslcd: [200854] <authc="ldapuser"> DEBUG: ldap_simple_bind_s("cn=ldapuser,ou=users,dc=company,dc=org","***") (uri="ldap://<my_ldap_server_ip>")
nslcd: [200854] <authc="ldapuser"> ldap_result() failed: No such object
nslcd: [200854] <authc="ldapuser"> cn=ldapuser,ou=users,dc=company,dc=org: lookup failed: No such object
nslcd: [200854] <authc="ldapuser"> DEBUG: set_socket_timeout(15,0)
nslcd: [200854] <authc="ldapuser"> DEBUG: ldap_unbind()
nslcd: [200854] <authc="ldapuser"> DEBUG: myldap_search(base="ou=users,dc=company,dc=org", filter="(&(objectClass=shadowAccount)(uid=ldapuser))")
nslcd: [200854] <authc="ldapuser"> DEBUG: ldap_result(): end of results (0 total)
journalctl -xlf:
Feb 20 20:37:24 centos7.localdomain sshd[4965]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=192.168.56.1 user=ldapuser
Feb 20 20:37:24 centos7.localdomain sshd[4965]: pam_ldap(sshd:auth): Authentication failure; user=ldapuser
Feb 20 20:37:26 centos7.localdomain sshd[4965]: Failed password for goncharuk from 192.168.56.1 port 56663 ssh2
UPD: I forgot show this links:
I've read this topics and they not help me:
Best Answer
Finally, the problem has been solved.
Some brief before concrete steps. Anyone knowns that LDAP login procedure followed this steps:
Authentification:
Authorization:
If login is incorrect on step 3, then 'User not found' message produced.
If password on step 4 is incorrect, then 'Invalid credentials' message produced.
Indeed, NSLCD do all these steps.
Step 4 in NSLCD have one improvement about security reasons. After 'bind'-ing as found user, NSLCD trying search in user 'DN' with base as 'DN' to ensure that this 'DN' is really 'DN' of 'bind'-ing user. For instance ('ldapsearch' request):
This behaviour was described by author of nss-pam-ldapd in at least this sources:
issue 1
issue 2
This mean that user which want to be logged in over NSLCD must have search permissions in own LDAP 'DN'!
In NSLCD versions before 0.9.x this behaviour was not changeable.
In NSLCD version that begins from 0.9.x it's possible to skip search in own 'DN' via 'pam_authc_search NONE' option.
In my case, using 'pam_authc_search NONE' really help me, but it's need to build and install 'nss-pam-ldapd' package with new version. Now, I am testing LDAP login on VM with Centos 7. I have at least 5 different distros and building packages for each is not good solution. In addition, two-phactor login checks (bind + search) is really need security tool. So, I changed my LDAP server (OpenLDAP 2.4) ACL-s to grand search access for users in own 'DN' and now all works fine:
/etc/openldap/slapd.conf: