Centos – BIND DNS nslookup NXDOMAIN

I have BIND DNS server installed in my LAN on Linux CentOS on IP 192.168.0.30. I also have HTTPD Web server installed in my LAN on Linux Centos on IP 192.168.0.23. My /etc/named.conf file is configured to use the /etc/forward.example.com zone file.

zone "example.com" IN {
 type master;
 file "/etc/forward.example.com";
 allow-update { none; };
};

Following the instructions in chapter 16.3 of the CentOS deployment guide, I have the following in my BIND forward zone file to create an A record to the IP address of the HTTPD Web server, and also to map a CNAME to the HTTPD Web server.

$ORIGIN example.com.
$TTL 1D
@ IN SOA  ns1.example.com. hostmaster.example.com. (
                            2016032200 ; serial
                            1D         ; refresh
                            1H         ; retry
                            1W         ; expire
                            3H         ; minimum
)
@            IN      NS         ns1.example.com.
ns1          IN      A          192.168.0.30

server1      IN      A          192.168.0.23
www          IN      CNAME      server1

The named-checkzone command produces OK, which ensures the forward.example.com zone file is OK.

[root@DNS1 ~]# named-checkzone example.com /etc/forward.example.com
zone example.com/IN: loaded serial 2016032200
OK

Running the command nslookup ns1.example.com produces the following output. This is good.

Server:     192.168.0.30
Address:    192.168.0.30#53

Name:       ns1.example.com
Address:    192.168.0.30

Running the command nslookup www.example.com produces the following output.

Server:     192.168.0.30
Address:    192.168.0.30#53

** server can't find www.example.com: NXDOMAIN

Running the command nslookup server1.example.com produces the following output.

Server:     192.168.0.30
Address:    192.168.0.30#53

** server can't find www.example.com: NXDOMAIN

I am not seeing errors in the named.run file.

[root@DNS1 ~]# tail /var/named/data/named.run

zone 0.in-addr.arpa/IN:          loaded serial 0
zone localhost/IN:               loaded serial 0
zone 1.0.0.127.in-addr.arpa/IN:  loaded serial 0
zone 0.168.192.in-addr.arpa/IN:  loaded serial 0
zone 1.xxxxxxxxxxx.ip6.arpa/IN:  loaded serial 0
zone example.com/IN:             loaded serial 0
zone localhost.localdomain/IN:   loaded serial 0
all zones loaded
running

Searching serverfault.com and google.com, I was unable to determine why I am getting the NXDOMAIN error. If there are any tips or recommendations, I sure would appreciate it!