Cisco – Best way to view Cisco config file

I am not quite sure what you want, but if you just want to map port 80 of an external to ip to an internal ip port 80. I think you pretty much have it, but I think you might just need to change:

ip nat inside source static tcp  80 10.10.10.60 80 extendable

to

ip nat inside source static tcp 98.123.123.94 80 10.10.10.60 80 extendable

But besides this, if this is production, once you have it working the way you think you want. You might want to pay a consultant to come in and check your work, it doesn't get much more important than the router.

Ask them to switch you to a different network port: you've got the half-duplex thing, and it taking a few minutes to bring the line up. Also, how well was your spare pix tested, are you sure it isn't another dud?