Cisco – Configuration of a Cisco IP Phone 7916 and 7975g

asteriskciscoexpansionsipvoip

Hi everyone,

I would appreciate some help configuring my Cisco IP Phone 7975.
In fact the phone works well with the SIP firmware (version SIP75.8-4-1ES2) and an Asterisk Server. Now I would like to connect a Cisco IP Phone 7916 Expansion Module to it. The problem is during my search on the web I have only found explanations to configure the expansion with a Cisco Unified Call Manager but not with Asterisk.

For information, the IP Phone gets its configuration file from a tftp server and the file follows the SEP.cnf.xml format.

So if someone here have already done this task before, can he pleases explain me.

Thanks in advance for your help.

Alex

Best Answer

I haven't had very much success with these phones and Asterisk in SIP mode. However, they work well using SCCP. Take a look at this SCCP module for Asterisk.

Related Topic