Cisco – Configuring Cisco ASA 5510 to assign static IP address based on MAC address

addressciscoipmac

We have a CISCO ASA 5510 at work. We want to configure the same such that it can serve specific IP addresses based on the MAC address of the clients.

Any help would be greatly appreciated.

Thanks in advance

-knd

Best Answer

You can't do it on an ASA. Not yet, anyway (8.2(2))

Related Solutions

Cisco ASA bonding/teaming/port-channel capabilities

I don't know the 5510 but from a spot of searching around I'd say it doesn't support port channels - which is surprising to be honest.

Cisco ASA 5510 – Time of Day Based Policing Configuration

The PIXOS feature you are looking for is called Time Based Access List. It is a two step approach

Create the time-range object
Attach the time-range object to a specific rule

The ASA will then only apply the targeted rule during that time-range. You should be able to get what you want with something like this

hostname(config)#time-range OffHours
hostname(config-time-range)#periodic weekdays 17:00 to 07:00
hostname(config)#access-list Residence line 1 extended permit ip any any time-range OffHours
hostname(config)#access-group Residence in interface inside

Full write-up at Cisco Command Reference

Best Answer

Related Solutions

Cisco ASA bonding/teaming/port-channel capabilities

Cisco ASA 5510 – Time of Day Based Policing Configuration

Related Topic