Cisco ios – syslog version

I am not quite sure what you want, but if you just want to map port 80 of an external to ip to an internal ip port 80. I think you pretty much have it, but I think you might just need to change:

ip nat inside source static tcp  80 10.10.10.60 80 extendable

to

ip nat inside source static tcp 98.123.123.94 80 10.10.10.60 80 extendable

But besides this, if this is production, once you have it working the way you think you want. You might want to pay a consultant to come in and check your work, it doesn't get much more important than the router.

Based on your configuration, these rules are NOT in use. Carefully check each router interface for evidence of an "ip inspect" command to be sure (show run | in inspect). If they were enabled, I would expect to see (for example):

interface serial 0/0
 ip inspect SDM_HIGH in
 ip inspect DEFAULT100 in

The document below may be helpful to explain exactly what you are seeing and provides examples of how these commands are tied together:

http://www.cisco.com/en/US/docs/ios/12_4t/12_4t4/ht_fw_im.html