ciscomonitoring
we are looking for monitoring Cisco Catalyst 2960 temperature, fan, voltage via Orion Universal device poller. we added "ciscoEnvMonFanState" but didnt show any Fan speed value or temperature value.
when we browse web admin console of the cisco switches, it`s only shows the temperature and fan value is OK. but we need to monitoring the specific value each time. what should I do?
how can I find these value and add to orion solarwinds monitoring gauge?
You mean the Cisco Network Assistant? I saw this a while ago... you'll need to login to get it: http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=268438038
It's possible on the 5505 model, but not the 5510 or higher, since don't have the integrated switch:
http://www.cisco.com/en/US/products/ps6120/prod_models_comparison.html
(See the "integrated ports" section)
To set it on the 5505:
ciscoasa> en
ciscoasa# conf t
ciscoasa(config)# int eth0/0
ciscoasa(config-if)# switchport monitor eth0/1
Where eth0/0 is your IDS port and eth0/1 is the interface you want to monitor.
To monitor an interface with the 5510 or higher, you'll need a separate switch with SPAN capabilities.
Best Answer
It seems that ciscoEnvMonFanState only provides 6 levels :
1 : normal
2 : warning
3 : critical
4 : shutdown
5 : notPresent
6 : notFunctioning
So it's basically the same as "sh env" on the switch. It only tells you if temp is OK or not.
Maybe you can use the Cisco SNMP Object Navigator to see if there is another oid/mib that would suit your needs.