Let me be honest. You don't know ANYTHING about Debian except adding a user, change password, install packages etc. I have this Debian with KVM and using virt-manager.
My server has this IP: 88.198.52.250.
I have these two IP's for my two guests (Windows):
- 88.198.52.252
- 88.198.52.253
I have found this simple guide: http://blog.elsobrino.org/2008/03/08/howto-setup-a-network-bridge-under-debian/
But the server is unreachable whenever i reboot after inserting the data for bridge0 (br0).
I would be very happy if you guys could point me in the right direction. Please, if you need anymore information, please let me know!
Thanks in advance!
Data:
/etc/network/interfaces
# Loopback device:
auto lo
iface lo inet loopback
# device: eth0
auto eth0
iface eth0 inet static
address 88.198.52.250
broadcast 88.198.52.255
netmask 255.255.255.224
gateway 88.198.52.225
# default route to access subnet
up route add -net 88.198.52.224 netmask 255.255.255.224 gw 88.198.52.225 eth0
brctl show
Empty
ip addr list
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNO WN qlen 1000
link/ether 40:61:86:2b:83:d2 brd ff:ff:ff:ff:ff:ff
inet 88.198.52.250/27 brd 88.198.52.255 scope global eth0
inet6 fe80::4261:86ff:fe2b:83d2/64 scope link
valid_lft forever preferred_lft forever
ip route show
88.198.52.224/27 via 88.198.52.225 dev eth0
88.198.52.224/27 dev eth0 proto kernel scope link src 88.198.52.250
default via 88.198.52.225 dev eth0
Best Answer
This question is being answered here.
The /etc/internet/interfaces ended up like this: