I have a Dell 2950 with MD3000, MD1000 ; Suddenly the I have lost all drives on both of the enclosures and all drives on the MD3000/1000 are blinking, but only ONE Light on each disk, not 2 Lights.
I have tried dell doc and can't seem to find this light status code so far, will be grateful if someone could assist as to what may be the cause or have I lost all data ?
This is a lab environment and the data on it is mainly file shares for our in-house staff.
we can afford to loose data but there are some folders which we would like to recover if possible.
If for example : (a) The SAS Card is dead, can we just replace the sas card and we would get our data back or are we done 🙂
Important Update
“I have just checked the Raid Logs – it says "Media Scrub Scan Completed" and right after that it says Event Type 2023 : Virtual Disk Deleted
No one has deleted the virtual disk, I have tried changing SAS Cards, MD3000 Raid Controllers, SAS cables but MDSM always shows Physical Drives and shows No Disk Groups or Virtual Disks.
Any thoughts ?
Will be grateful
Best Answer
Try to get into MDSM and see what's going on, it can provide some good indication of the system status. If the SAS HBA is busted it's easy to spot - you won't be able to get MDSM connected using in-band connections, and will have to go OOB.
A controller might be gone, and you can just swap them out, or try to start with just one (they them both)
If the MD3000 and MD1000 are not separate, but are in a cascade, you might want to try and just connect to the MD3000 without anything hooked into it.
The key is to try components in an isolated way, and once the culprit is found, fix it.
The more important key is - call Dell support, they are much better at these things than anyone else can be