DELL PowerEdge 2950 stuck on BIOS

I don't know the details but the R710 has a BIOS Power/Performance options page. In it you can select to turn on and off features which will either save power and boost performance.

You can change these settings so I wouldn't worry about it.

It does make a difference, it will only make sense if you require the RAS (Reliability, Availability, and Service) features on x4 or x8 devices and understand the trade-offs for your needs. More details can be explained in the Dell white paper Dell™ PowerEdge™ Servers 2009 - Memory.

Also, configuration and layout with details specific to the R710 are available on the Technical Guidebook for the PowerEdge R710 - (Google this because I don't have reputation for link).

The important issue to note is the difference between ECC on the chip and the "Advanced ECC" provided by Dell's BIOS for Single Device Data Correction (SDDC). You will have a performance impact on both. The ECC will recover from errors during writes to the chip. However, SDDC goes a step further and will organize the bits so that an entire chip can fail and still be recoverable. See an example and details SDDC E7500 Chipset

The issues is whether your performance and/or reliability are of the utmost concern in your specific usage of the machine. If a chip failure will cause a loss of critical data or usage on this machine and it's non-redundant in the implementation, Advanced ECC may be a great way to go. However, you do so at a performance impact which may be more important to you.

I've implemented both in the field on Dell PowerEdge servers for single Microsoft SQL Server implementations. If I can be of more help, just comment to let me know.

Hope that helps.

EDIT: Coverage gap / ECC implementations

Yes, there is a coverage gap even if you implement both. Since, you are specifically using a cluster of high availability servers, IMHO you should use the Advanced ECC. Your performance impact is minimal compared to the benefits for the clustered devices. According to Crucial you have only a 2% decrease in performance on ECC memory in general.

The gap would be more specific to the types of errors that occur and how each handles the errors. In your specific situation it shouldn't translate to data loss. Since this is an Enterprise DBMS and errors, concurrency issues, etc. are managed at the software level in order to prevent data loss. A detailed history is kept of changes in a properly configured DBMS and the software that uses it can typically setup to have the transaction "rollback" any if a severe error occurs.

ECC Implementations

ECC will attempt to correct any bit errors in memory read/write. However, if the error is more significant, then not even ECC will be able to recover, causing potential loss of data. There is more discussion on ECC as well at ServerFault/What is ECC ram and why is it better?

According to Wikipedia on ECC_Memory

ECC memory maintains a memory system effectively free from single-bit errors...

SDDC

If you refer to the E7500 chipset document above (note the 55xx/56xx from Intel require login/partnership but the idea is similar which is why I didn't link originally), which describes SDDC and how it's made possible. Basically, it uses a technique for organizing the words written to memory that ensures all are written in such a way that every word will only contain a single bit error i.e. the word should be recoverable from the single bit error (as above). Now that's per word, so it could potentially recover from up to 4-bit errors on x4 devices (1 per word) and up to 8-bit errors on x8 devices (still 1 per word) by error correcting each word.

Additional errors, more bit errors, total memory failure, channel failure, bus failure, etc. can still all cause horrible problems but that's why you have a cluster and an Enterprise DBMS.

In short, if you have everything enabled and there's too many bit errors for error correction algorithms to correct you will still have an error i.e. error coverage gap. These can be exceptionally rare though.