FC multipath says “device busy ” when connecting again. SLES 11 – netapp – emulex

I have a weird issue.

sles 11
emulex FC
netapp fas 2xxx

100G LUN is ok.
Multipath enabled, multipathd and device-mapper seem to work properly.

multipath -t shows this output of the config => http://pastebin.com/bmEBhdeX

When both FC are connected I get this output from multipath -ll

360a98000572d5073538f68484c4c512f dm-0 NETAPP,LUN
[size=200G][features=1 queue_if_no_path][hwhandler=0][rw]
_ round-robin 0 [prio=8][active]
_ 1:0:0:70 sdc 8:32 [active][ready]
_ 2:0:0:70 sde 8:64 [active][ready]
_ round-robin 0 [prio=2][enabled]
_ 1:0:1:70 sdb 8:16 [active][ready]
_ 2:0:1:70 sdd 8:48 [active][ready]

When I unplug one FC everything goes fine.

The issue appears when connecting again, on the desktop a sdb or sdc "device is busy" . And then it does not appear on multipath -ll.

I though it could be that automount or similar tries to mount the sdb or sdc device, put they are not in the fstab and automount is not running.

Any suggestions?

thanks.

PD: Just in case you are curious the messages file => http://pastebin.com/2PfxSDKE (look arround 13pm and 15pm.