Firewall – Upload config to Cisco ASA 5505 via copy/paste (No TFTP)

ciscocisco-asafirewall

I copy/pasted the running-config to a .txt file on my directly-attached PC. How do I paste or otherwise upload that config to the ASA?

All resources I've found just talk about using TFTP, but there has to be a way to simply paste it back into the running-config…

Best Answer

You simply paste it in a SSH or Telnet session (or via the web gui in the Tool->Command Line Interface)

Related Solutions

Cisco 7206 error trying to copy running-config (Bad file number)

This sounds like there is something going on with your flash/memeory. can you dir system: ? can you copy the startup-config off to tftp (at least if the systems does go down hard you'll have somewhere to go from).

Also i would open a TAC case.

Firewall – Cisco ASA 5505 config

Turn off the dhcp server on the asa:

no dhcpd enable inside

Or if you want your ASA to serve dhcp, modify the address pool to match the subnet you want your inside interface to be on:

dhcpd address 139.78.8.2-139.78.8.100 inside

(modify the address range as necessary)

Best Answer

Related Solutions

Cisco 7206 error trying to copy running-config (Bad file number)

Firewall – Cisco ASA 5505 config

Related Topic