again me, i just dont get why i m getting this message, when i try to connect my ftp server thorugh my wan address (112.135.26.115) its saying me, 530 user access denied
but when i give the same data to http://ftptest.net the result is as follows…
Status: Resolving address of 112.135.26.115
Status: Connecting to 112.135.26.115
Status: Connected, waiting for welcome message
Reply: 220-FileZilla Server version 0.9.34 beta
Reply: 220-written by Tim Kosse (Tim.Kosse@gmx.de)
Reply: 220 Please visit http://sourceforge.net/projects/filezilla/
Status: CLNT http://ftptest.net on behalf of 112.135.26.115
Reply: 200 Don't care
Status: USER saravana
Reply: 331 Password required for saravana
Status: PASS *********
Reply: 230 Logged on
Status: SYST
Reply: 215 UNIX emulated by FileZilla
Status: FEAT
Reply: 211-Features:
Reply: MDTM
Reply: REST STREAM
Reply: SIZE
Reply: MLST type*;size*;modify*;
Reply: MLSD
Reply: AUTH SSL
Reply: AUTH TLS
Reply: UTF8
Reply: CLNT
Reply: MFMT
Reply: 211 End
Status: PWD
Reply: 257 "/" is current directory.
Status: Current path is /
Status: TYPE I
Reply: 200 Type set to I
Status: PASV
Reply: 227 Entering Passive Mode (112,135,26,115,43,9)
Status: MLSD
Reply: 150 Connection accepted
Listing: type=dir;modify=20100322113235; it_is_working!_Andrejs_Cainikovs_from_serverfault.com
Listing: type=file;modify=20100322110559;size=5; New Text Document.txt
Reply: 226 Transfer OK
Status: Success
can anyone say why this happens to me? please im trying the whole day!!
here is the log from my local access through filezilla client
Status: Connecting to 127`enter code here`.0.0.1:21...
Status: Connection established, waiting for welcome message...
Response: 220-FileZilla Server version 0.9.34 beta
Response: 220-written by Tim Kosse (Tim.Kosse@gmx.de)
Response: 220 Please visit http://sourceforge.net/projects/filezilla/
Command: USER saravana
Response: 331 Password required for saravana
Command: PASS **********
Response: 230 Logged on
Command: SYST
Response: 215 UNIX emulated by FileZilla
Command: FEAT
Response: 211-Features:
Response: MDTM
Response: REST STREAM
Response: SIZE
Response: MLST type*;size*;modify*;
Response: MLSD
Response: UTF8
Response: CLNT`enter code here`
Response: MFMT
Response: 211 End
Status: Connected
Status: Retrieving directory listing...
Command: PWD
Response: 257 "/" is current directory.
Command: TYPE I
Response: 200 Type set to I
Command: PASV
Response: 227 Entering Passive Mode (127,0,0,1,43,10)
Command: MLSD
Response: 150 Connection accepted
Response: 226 Transfer OK
Status: Directory listing successful
Best Answer
Is the FTP server NAT'd to a public IP address? If so try connecting to it from the internal IP address when you are on your LAN. Many firewalls will block traffic that goes out the firewall from coming back in. So if the FTP server has an internal address which the firewall NAT's to the public IP address, then the ftptest.org test will work becuase it is completely outside your firewall, however, your PC may not work because it is trying to leave the network to get to a public IP address then come back in via the NAT route. Going to the Internal IP address solves this problem.