I need to restart/reboot an Alcatel-Lucent OmniSwith 9600. I cannot find the option to reboot the switch from the web interface. How else can I reboot the switch without pulling the power? I was able to log into the Telnet portal, but not sure what command can be used there to reboot. Any help would be appreciated.
How to restart Alcatel-Lucent OmniSwitch 9600
alcatel-lucentboottelnet
Related Topic
- Sql-server – telnet on port 1433 not working
- How to move a number between two Alcatel Lucent 4029 Handsets
- Switch – cascading load on connected Alcatel-Lucent OmniSwitch units via VLANs
- High ping times and packet loss on Alcatel-Lucent OmniSwitch 9600
- Windows Server 2012 R2 sometimes fails to boot (or shut down?) – stuck at spinner
- How to connect an Alcatel-Lucent IP touch phone over VPN
Best Answer
IIRC the command to reboot an Omniswitch is simply
reloadI'd make sure you have saved the config first though (which I believe is
write memorybut it's been years since I've messed with one of these to be honest).The switches CLI reference guide on Alcatel's site should help as well...but I think the above is accurate.