HP DL180 G6 P410 8x SATA 1TB, what is the optimal configuration

configurationhphp-proliantraidraid10

I have a HP DL180 G6 with a P410 raid controller.

Presently this runs using 4x 1TB Samsung Spinpoint SATA drives, in a RAID10 configuration using default settings.

I am about to add a backplane to increase the drive capacity from 4 to 12 drives, and I plan to install 4 more 1TB SATA Drives.

  • The drives are matched and have close serial numbers (They arrived together in the Manufacturers pallet).
  • Model HD103UJ 1000GB/7200rpm/32M
  • Rated for 3GB/s

I will also be installing RHEL 6.1 x86_64.

My question is what would be the optimal RAID settings (stripe etc.) for this configuration?

To recap:

  • 8x Model HD103UJ 1000GB/7200rpm/32M
  • Rated for 3GB/s
  • RAID 10 configuration.

Thanks in advance.

Update for role:

  • Server is to become an iscsi target for an internal openstack deployment currently underway. (Glance)
  • Will also provide virtualisation through KVM

Best Answer

A few quick things...

Does the Smart Array P410 controller in your system have a battery-packed or flash-backed cache unit? If not, you will want to add one in order to have acceptable write performance (and possibly allow expansion of the drive array).

Are you doing this as a complete rebuild of the server, or are you looking to expand in-place?

I'd recommend RAID 1+0 in general, but especially with high-capacity low-speed drives. You can probably get by with the defaults suggested by the HP Array Configuration Utility.

Related Topic