HP ProLiant DL380 G6 (need help)

boothphp-proliant

I have a Problem with mit DL380 G6.
since few months i started my server for the first time again and the G6 wont boot anymore.
the fans goes louder and louder for a minute and then it shutdown by itself.
then i can hear a tock sound that tocks like a real clock.
changing the RAM, Power supplies and CPU without success.

I postet a video about the problem:
https://www.youtube.com/watch?v=Toaok7UYmX4&feature=youtu.be

Thanks!

Best Answer

Configure your ILO. If it's not configured and you have no video output, then follow see here and follow the troubleshooting steps:

enter image description here

If nothing there works, try to use the steps I posted here:

ProLiant DL380 G7 won't boot, solid amber power LED

But here's a (lengthy) troubleshooting procedure to try...

  • Remove the power supply units and swap them.

Test to see if the system will boot...

If that doesn't work:

  • Remove all power supplies from the chassis
  • Locate the System Maintenance Switch on the motherboard - It's a set of 10 DIP switches.
  • Turn switch #6 switch on.
  • Insert all power supply units.
  • Power on the server and allow it to idle for 3 minutes.
  • Power the server off.
  • Remove all power supplies.
  • Return DIP switch #6 to off (original) position.
  • Reinsert the power supplies.
  • Power the server on.

Test to see if the system will boot...

If that doesn't work:

  • Remove all power supplies from the chassis
  • Turn DIP switches #1, 5 and 6 switch on.
  • Insert all power supply units.
  • Power on the server and allow it to idle for 3 minutes.
  • Power the server off.
  • Remove all power supplies.
  • Return DIP switches #1, 5 and 6 to off (original) position.
  • Reinsert the power supplies.
  • Power the server on.

Test to see if the system will boot...

Related Topic