I've noticed that my HP ProLiant Gen8 servers report the following message via email to root (or the destination configured in /opt/hp/hp-snmp-agents/cma.conf
) upon restart.
Trap-ID=11020
cpqHoMibHealthStatusArray has changed to the value :02 03 02 02 02 02 02 03 02 02 02 02 02 01 01 02
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
or sometimes…
Trap-ID=11020
cpqHoMibHealthStatusArray has changed to the value :02 04 02 02 00 00 02 04 02 02 02 02 02 01 01 02
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
This seems to be unique to the EL6.x and Gen8 combination and happens upon initial boot or the restart of the hp-snmp-agents
service. Any ideas on what this output means?
Best Answer
This is documented. Check out the post at HP Blogs called "HP ProLiant Gen8 Agentless Management Overview" -- the relevant portion is copied below. Basically, each array element is the status of a different monitored component.
The definition of “cpqHoMibHealthStatusArray”:
There is more information in the HP SIM MIB Kit documentation.