ilo
Does HP Standalone iLo Integrated Remote Console work with iLO2?
I can log in via the web UI, and use the Java viewers just fine.
When I try to connect with the standalone .NET app, it gives the error:
The remote server returned an error: (404) Not Found.
Does this utility not work with iLO 2?
Close your browser. Flush your cache. Open the ILO again.
If that does not work, reset the ILO by going to "Diagnostics" and choose "Reset ILO".
HP had a pretty awful initial set of firmware releases for the ILO3 management interface. See the massive changelog documenting the evolution of the product. I was working for a firm that deployed a large number of ProLiant DL380 G7 servers and had to deal with the pain of managing the buggy feature set.
In your case, you're trying to move from a very old ILO revision (1.15, circa 2010) to the current version (1.70).
In order to accomplish this, you have to perform the upgrade in two steps:
First, upgrade to an ILO version between 1.20 and 1.28. I'd recommend 1.28. HP placed a firmware prerequisite on ILO 1.50 and newer in 2012, so this intermediate update is absolutely necessary. You may need to do this by hand using the shell interface.
From there, you should be able to bring the ILO version to the current 1.70.
I covered this in: Updating ILO on HP DL380 G7 fails due to firmware version gap when I encountered the issue.
When I had to do this en masse, I kept both firmware files handy in case I encountered super old or neglected servers.
Best Answer
From the installation instructions:
No, this tool will not work with an ILO2 management processor.