I'm trying to upgrade a Sun t5120 server from 4GB to 8GB of RAM memory:
I followed all the steps described on the section "Upgrade Memory Configuration With Additional FB-DIMMs" "Sun SPARC Enterprise T5120 and T5220 Servers Service Manual"
When I run showfaults command from ALOM I'm getting always this output:
sc> showfaults
Last POST Run: Wed Jul 29 09:50:21 2009
Post Status: Passed all devices
ID FRU Fault
1 /SYS/MB/CMP0/BR0/CH0/D0 SP detected fault: /SYS/MB/CMP0/BR0/CH0/D0 Inserted disabled
2 /SYS/MB/CMP0/BR0/CH1/D0 SP detected fault: /SYS/MB/CMP0/BR0/CH1/D0 Inserted disabled
3 /SYS/MB/CMP0/BR1/CH0/D0 SP detected fault: /SYS/MB/CMP0/BR1/CH0/D0 Inserted disabled
4 /SYS/MB/CMP0/BR1/CH1/D0 SP detected fault: /SYS/MB/CMP0/BR1/CH1/D0 Inserted disabled
What does it means this message? How I can fix this issue?
Thanks in advance
Best Answer
Perhaps this link can help you clarify what kind of error is occurring. http://docs.sun.com/source/820-4445-10/chapter1.html
The document referenced above appears to be here now