If possible you should try and direct the logs from the AP to a syslog server and possibly discover from them what is going on.
You could also try and use Wireshark to see what is happening to the traffic on your network and see if it is the AP that is isolating the connections or if it is a firewalling issue on the hosts.
There is a "secret" keyboard shortcut to force an exit :~) From the frozen session, hit these keys in order: Enter~. The tilde (only after a newline) is recognized as an escape sequence by the ssh client, and the period tells the client to terminate it's business without further ado.
The long-hang behavior on communication issues is not a bug, the SSH session is hanging out hoping the other side will come back. If the network breaks, sometimes even days later you can get an SSH session back. Of course you can specifically tell it to give up and die with the sequence above. There are also various things you can do such as setting keep-alive timeouts in your client so that if it doesn't have an active link for a certain amount of time it shuts off on it's own, but the default behavior is to stay as connected as possible!
Edit: Another useful application of this interrupt key is to get the attention of the local ssh client and background it to get back to your local shell for a minute —say to get something from your history— then forground it to keep working remotely. Enter~ Ctrl+Z to send the ssh client to the background job queue of your local shell, then fg as normal to get it back.
Edit: When dealing with nested SSH sessions, you can add multiple tilde characters to only break out of one of the SSH sessions in the chain, but retain the others. For example, if you're nested in 3 levels, (i.e. you ssh from local->Machine1->Machine2->Machine3), Enter~. will get you back to your local session, Enter~~. will leave you in Machine1, and Enter~~~. will leave you in Machine2. This works for other escape sequences as well, such as moving the ssh session to background temporarily. The above works for any level of nesting, by just adding more tilde's.
Finally, you can use Enter~? to print a help menu of available escape commands.
TL;DR - the supported escape commands are
Supported escape sequences:
~. - terminate connection (and any multiplexed sessions)
~B - send a BREAK to the remote system
~C - open a command line
~R - request rekey
~V/v - decrease/increase verbosity (LogLevel)
~^Z - suspend ssh
~# - list forwarded connections
~& - background ssh (when waiting for connections to terminate)
~? - this message
~~ - send the escape character by typing it twice
(Note that escapes are only recognized immediately after newline.)
Best Answer
Have you tried clearing the ARP cache from all devices? If multiple devices shared the same IP address, that is recorded in the ARP cache of neighboring network devices. Til that is cleared, the devices will keep thinking there are duplicate addresses on the network