IP Routing through VPN to Windows Server

routewindows 7

I have the following network topology:

  • Remote admin network (192.168.10.0/24) I connect to using PPTP to the public IP
  • Remote gateway assigns an IP adress to me (192.168.10.100, for instance)
  • I can reach any server on the 192.168.10.0/24 subnet
  • I cannot reach any server on the 192.168.20.0/24 (DMZ) subnet
  • Note that I added a static route in Windows in order to route the traffic to 192.168.20.0/24 through the VPN's gateway (192.168.100.1):

Persistent Routes:
Network Address Netmask Gateway Address Metric
192.168.20.0 255.255.255.0 192.168.10.1 1

(sorry for poor formating)

However when I do a trace route, I can clearly see that Windows is routing the packets to my default, non VPN, gateway:

Tracing route to 192.168.20.1 over a maximum of 30 hops

1 1 ms 1 ms 1 ms my.firewall [192.168.2.1]
2 5 ms 4 ms 4 ms 192.168.1.1
3 (edited out public ip) reports: Destination net unreachable.

How can this be? Why is Windows routing to my default gateway (192.168.2.1) when I explicitely specified a different gateway for this destination subnet (192.168.20.0) ?

Best Answer

Sorry for answering my own question but here goes.

Basically I simply had to re-add the route manually (route add 192.168.20.0 MASK 255.255.255.0 192.168.10.1). Doing this fixed the issue. Apparently, even though the route shows as "Persistent" it was not. This happens whenever I reboot. I don't know if it's a bug or simply because interface numbers can change between two reboots (both sound very doubtful but that's all I can think of).

Related Topic