Is Internet Explorer 11 Supported on Windows Server 2019?

The devised procedure worked flawlessly:

1. enable SMB 1.0
2. add to domain
3. install AD DC in roles ad features
4. PowerShell: Move-ADDirectoryServerOperationMasterRole -Identity SERVERNAME -OperationMasterRole SchemaMaster, DomainNamingMaster, PDCEmulator, RIDMaster, InfrastructureMaster

Also to note: IP should be fixed, On both server DNS primary should be new DC, and don't forget to update the DHCP setting to set DC as first DNS server.

Using the WebAdministration module is safe but it's also slow.

As long as your target server is not live yet and you can play around with it, I would directly edit the C:\Windows\System32\inetsrv\config\ApplicationHost.config file.

Copy the <sites> node from the config file on the old server to the config file on the new server.

Also copy any <location ...> notes, usually at the end of the file.

IIS 8.5 and IIS 10 are very similar and this should work. Always make a backup of the file you are changing.

Then you can just use Search and Replace of in the config file to change physical locations or bindings.