Kvm low io performance

hard drivekvm-virtualizationlibvirtperformance

performance of my setup is quite good (geekbench, how it 'feels', …) even disc throughput (libvirt on raw lvm-partition) is very close to the raw performance on the server) but IOP/s are as low as 100-200 guestside (compared to ~1000 hostside) on both linux and windows-guests.
Is this a thing to live with (kvm just can't do it better) or am i doing something completely wrong ?

The interesting thing is that i was able to impact the throughput by changing the setup (qcow2 vs raw-image vs raw-partition) or the configuration (caching or io-scheduling) and variations but IOPs stayed at the same low point over all those combinations.

hardware#

• supermicro dual xeon E5520 with 24GB RAM
• 2x seagate constellation 1TB (RAID1 on Adaptec 3405)
• 2x seagate cheetah (RAID1 on Adaptec 6405).

software

• ubuntu 11.10 3.0.0-13-server
• kvm/QEMU emulator version 0.14.1 (qemu-kvm-0.14.1)
• benchmarking the disks (bonnie++, hdparm) from the hosts and guests (bonnie++, hdparm, hdtune on windows)

config

i tested several disc-configurations, the current setup is:

linux hosts

(They just don't "need" hight IO-Performance so i keep the more comfortable discfiles)
• qcow2 disc files on lvm on my constellations
• qemu/ide

<disk type='file' device='disk'>
  <driver name='qemu' type='qcow2'/>
  <source file='/media/vm/images/mex/mex_root.qcow2'/>
  <target dev='hda' bus='ide'/>
  <address type='drive' controller='0' bus='0' unit='0'/>
</disk>

windows hosts###

(Running SQL-Server and Remote-Desktop-Services, so here I definitely need a good IO-Performance)
• raw lvm partitions on my cheetahs
• virtio

<emulator>/usr/bin/kvm</emulator>
<disk type='block' device='disk'>
  <driver name='qemu' type='raw' cache='none'/>
  <source dev='/dev/Cheetah/mts'/>
  <target dev='vda' bus='virtio'/>
  <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</disk>

Best Answer

The optimal configuration is (usually) as follows:

  1. On the host, set elevator=deadline
  2. Use virtio and only virtio
  3. use raw LVs whenever possible. Qcow2 gives overhead. Files on a FS also have overhead
  4. in the VM use the elevator=noop
  5. both in host and VM, use noatime,nodiratime in fstab wherever possible
  6. Make sure the virtio drivers are up to date, especially the windows ones.
  7. Debian based distros are (arguably) not as good as Fedora and RHEL for QEMU/KVM. Not to start a flamewar, but most of the development and testing is done on Fedora and RHEL, and in my own experience, there have been lots of issues on Ubuntu and Debian that I couldn't reproduce on Fedora and RHEL. You can ignore this particular bullet if you want, but if you're looking for a solution, a quick benchmark on another distro is usually worth a try
Related Topic