Linux – Elastix 2.2 clock not keeping correct time

hyper-v-server-2008-r2linuxpbx

I'm configuring our Elastix 2.2 server and the clock was not in sync. When I check the machine in Linux this is what it says. I've tried to search for a resolution but came up empty.

This is installed on a 2008 R2 ent server under HYPER-V.

When I installed this I had to set it up with a legacy network adapter because the default "network adapter" did not allow connectivity.

Not sure how to update the clock though. I'm somewhat new to Linux so hoping this is an easy issue.

Any help would be much appreciated!!!!

Error message that randomly cycles accross linux is 

hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortCommand }
ide: failed opcode was: 0xec
time.c: can't update CMOS clock from 59 to 0"

in no specific order.

Thanks for your time.

Best Answer

Some links you might look at:

Related Topic