Linux – How to install redhat linux on HP DL380 G6 server

hp-proliantlinuxredhat

I have here DL380 G6 server, But i have not been able to install the redhat linux on it.

Its smart start disk do not have linux on it.
When i directly boot from DVD it boots in GUI mode but when selects automatic partition it gives an error and after clicking ok it Reboots.

the error relates to disk.

Please advice

Best Answer

The G6 servers should be covered with recent CCISS driver updates from RedHat. Are you installing from the original CDs or have you downloaded ISOs from later updates? If you're using the original CDs or an old update, you'll need a driver disk.

Here's the link to the driver disk needed for RHEL 5 64-bit on a ProLiant DL380 G6.

Here is the general listing for the DL380 G6.

Select the OS of your choice and then the driver disk link. Follow those installation instructions and work from there.

Related Solutions

Linux Bash – How to Sort du -h Output by Size

As of GNU coreutils 7.5 released in August 2009, sort allows a -h parameter, which allows numeric suffixes of the kind produced by du -h:

du -hs * | sort -h

If you are using a sort that does not support -h, you can install GNU Coreutils. E.g. on an older Mac OS X:

brew install coreutils
du -hs * | gsort -h

From sort manual:

-h, --human-numeric-sort compare human readable numbers (e.g., 2K 1G)

Linux – minimal/lightweight Linux distro that directly boots into Xen / VBox so I can create/boot into one or more Virtual Machines

Well, I don't know if you can skip the bootloader, as it's necessary for even 1 OS/Kernel. Regardless, the bootloader is tiny and you can set the timeout to 0 or 1.

As for minimal/lightweight Linux, you can install a base CentOS distro without any custom packages and load it with Xen. I've done this very thing and I can get a bare-bones CentOS distro down to around 300MB (and probably smaller if I spent more time). It boots into Xen and starts up all the VMs I have created.

Once you have a base CentOS installed, run the following to install Xen:

# yum groupinstall Xen

Once it's all done, make sure you edit your /etc/grub/grub.conf config to boot the Xen kernel (set default to 0).

This guide may also be helpful for installing additional VMs:

http://wiki.centos.org/HowTos/Xen/InstallingCentOSDomU

I hope this helps!

Best Answer

Related Solutions

Linux Bash – How to Sort du -h Output by Size

Linux – minimal/lightweight Linux distro that directly boots into Xen / VBox so I can create/boot into one or more Virtual Machines

Related Topic