I have a linux server (centos 5) which for the past 2-3 weeks has been resetting it's ip config information to a local ip (192.168.x.x). In /etc/network/interfaces I have:

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
address 172.20.10.10
netmask 255.255.255.0
gateway 172.20.10.1

So, i would have thought this would sort the problem. I have also tried running a reset of the details at 7am each morning with a cron:

0 7 * * * route add default gw 172.20.10.1 eth0
0 7 * * * ifconfig eth0 172.20.10.10 netmask 255.255.255.0

But that doesn't seem to work either.

cat /etc/sysconfig/network:

NETWORKING_IPV6=no
NETWORKING=yes
HOSTNAME=localhost.localdomain

cat /etc/sysconfig/network-scripts/ifcfg-eth0:

TYPE=Ethernet
DEVICE=eth0
BOOTPROTO=none
NETMASK=255.255.255.0
IPADDR=172.20.10.10
HWADDR=00:16:17:d6:31:f9
GATEWAY=172.20.10.1
DHCP=no
PROBE=no

The server is on a managed VPN (i think) inside a building of offices. We aren't aware of any DHCP servers and it's only been happening for 2-3 weeks. The building's network admins say they haven't changed anything that would affect it and we can't think of anything we have done either.

Any help would be much appreciated as I'm really stuck!

UPDATE 1

Noticed this in boot.log:

May 17 02:02:43 localhost NET[30723]: /sbin/dhclient-script : updated /etc/resolv.conf

So, i've had a look at /etc/resolv.conf and I get this:

; generated by /sbin/dhclient-script
nameserver 192.168.1.1

UPDATE 2

If read a little more about dhclient-script and it's called by dhclient which references dhclient.conf. I think it looks for it in /etc/. The only one i can find on our serve is at /etc/dhcp/dhclient.conf and it contains:

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
address 172.20.10.10
netmask 255.255.255.0
gateway 172.20.10.1