Here's my system info:
System Information
Manufacturer: Supermicro
Product Name: X8DT3
Version: 1234567890
Serial Number: 1234567890
UUID: 3EFC338F-2038-F257-3B5E-0025902BF938
Wake-up Type: Power Switch
SKU Number: To Be Filled By O.E.M.
Family: 1234567890
A snippet of the sensors-detect
output:
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `adm1021' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 0400'
Busdriver `i2c-i801', I2C address 0x18
Chip `max1617' (confidence: 6)
* Bus `SMBus I801 adapter at 0400'
Busdriver `i2c-i801', I2C address 0x19
Chip `max1617' (confidence: 6)
* Bus `SMBus I801 adapter at 0400'
Busdriver `i2c-i801', I2C address 0x1a
Chip `max1617' (confidence: 6)
#----cut here----
# I2C adapter drivers
modprobe i2c-i801
# Chip drivers
modprobe adm1021
/usr/bin/sensors -s
#----cut here----
These modules were loaded into the running kernel:
# lsmod | grep i2c
i2c_dev 43977 0
i2c_i801 41813 0
i2c_ec 38593 1 sbs
i2c_core 56641 4 adm1021,i2c_dev,i2c_i801,i2c_ec
# lsmod | grep adm
adm1021 47857 0
hwmon 36553 2 adm1021,power_meter
i2c_core 56641 4 adm1021,i2c_dev,i2c_i801,i2c_ec
but sensors
returns the incorrect CPUs temperature:
# sensors
max1617-i2c-0-18
Adapter: SMBus I801 adapter at 0400
Board Temp:
+0°C (low = +16°C, high = +66°C)
CPU Temp: +2°C (low = +0°C, high = +0°C)
max1617-i2c-0-19
Adapter: SMBus I801 adapter at 0400
Board Temp:
+0°C (low = +16°C, high = +66°C)
CPU Temp: +2°C (low = +0°C, high = +0°C)
max1617-i2c-0-1a
Adapter: SMBus I801 adapter at 0400
Board Temp:
+0°C (low = +16°C, high = +66°C)
CPU Temp: +2°C (low = +0°C, high = +0°C)
What might be the cause of this?
Reply to @Fox:
As far as I can remember, most SPMC systems had either one of LM*
chips, or Winbond (w83*) ones. You may try checking that out, and/or
try scanning the 'ISA' bus in sensors-detect as well.
I did that:
Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM78-J' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
There is an interesting line from the sensors-detect
output:
Found `Winbond W83627HF/F/HG/G Super IO Sensors'
(but not activated)
btw. if you have all the modules detected and loaded correctly, you
should also see coretemp sensors for monitoring CPU temperature.
But as you can see from the output, there is no coretemp sensor.
There is also another possibility to monitor temps/voltages/rpms if
you happen to have the -F version of the mother board (the one with
IPMI). Then the easiest and most reliable way (at least for me) is to
useipmitool sdr
, oripmitool sensors
.
Same to ipmiutil sensor
, I got the unspecified for CPU Temp:
# ipmiutil sensor
0007 SDR Full 01 34 20 a c0 snum 01 CPU1 Temp = 00 Warn-lo 0.00 unspecified
0008 SDR Full 01 34 20 a c0 snum 02 CPU2 Temp = 00 OK 0.00 unspecified
0009 SDR Full 01 36 20 a 01 snum 03 System Temp = 1c OK 28.00 degrees C
# ipmitool sensor
CPU1 Temp | 0x0 | discrete | 0x0100| na | na | na | na | na | na
CPU2 Temp | 0x0 | discrete | 0x0000| na | na | na | na | na | na
System Temp | 28.000 | degrees C | ok | -9.000 | -7.000 | -5.000 | 75.000 | 77.000 | 79.000
Reply to @thinice:
I got the same results with ipmitool sdr
:
# ipmitool sdr
CPU1 Temp | 0 unspecified | ok
CPU2 Temp | 0 unspecified | ok
System Temp | 26 degrees C | ok
ipmitool sdr entity 3
returns nothing.
Best Answer
Well I'm not exactly answering your question, but from my experience with SPMC servers, lm_sensors usually behave weird, without their proprietary SuperDoctor. But you may even have a wrong driver.
As far as I can remember, most SPMC systems had either one of LM* chips, or Winbond (w83*) ones. You may try checking that out, and/or try scanning the 'ISA' bus in sensors-detect as well.
btw. if you have all the modules detected and loaded correctly, you should also see coretemp sensors for monitoring CPU temperature.
There is also another possibility to monitor temps/voltages/rpms if you happen to have the -F version of the mother board (the one with IPMI). Then the easiest and most reliable way (at least for me) is to use
ipmitool sdr
, oripmitool sensors
.