I'm using Ubuntu 11.10 Desktop x64 with Native ZFS using a mirrored pool of 2×2 TB 6.0 Gbps hard drives. My issue is that I'm only getting about 30 Mb/s read/write at any time, I would think my system could perform faster.
There are some limitations though:
-
I'm using an Asus E350M1-I Deluxe Fusion which is a 1.6 Ghz processor
and a maximum of 8 Gb ram, which I got. I didn't know about ZFS when
I bought the system and these days I would've selected a system
capable of more ram. -
My pool has about 15% free space, but performance wasn't that much better when I had more than 50% free space.
-
When the processor is very busy the read/write performance seems to decrease, so it may very well be the processor that is the bottle neck.
I've read the other posts on this site about using an SSD as a log cache device which is what I'm thinking of doing, considering I don't have that much ram.
My questions:
-
Do you think adding a SSD as log cache device will improve
performance? -
Should I instead get another 2 TB hard drive and make a RAID-Z pool
instead? (I'm gonna need the space eventually, however the price is
still high on mechanical drives) Would this increase performance? -
Sell my system and go for an Intel i3 instead?
Thanks for your time!
Best Answer
Note that due to licensing concerns ZFS is not a native filesystem within the Linux Kernel but a FUSE implementation in userspace. As such, it has significant operational overhead which is also well-visible in benchmarks. I believe this to be the main problem here - a high amount of overhead in conjunction with the rather low processing performance of your system.
In general, adding an SSD in whatever capacity will only be of any help if I/O is actually a bottleneck. Use iostat to verify this.
Adding an SSD as a separate log device will only help if your main problem is the synchronous write load. It will not do anything to reads or asynchronous writes (which are cached and lazy-written). As a simple yet quite effective test, you should temporarily disable the intent log - if your overall performance increases significantly, you would benefit from an SSD log device.
Adding an SSD as a L2ARC will help your reads if you have a rather compact "hot" area on your filesystem which is read in a random fashion frequently. L2ARC does not cache sequential transfers, so it would be rather ineffectual for streaming loads.