I've been tasked with buying a server that needs a ton of storage in a RAID0 (in the 8-12TB range). Since I know nothing about RAID controllers, I figured I could just put 4x2TB into a RAID0 array and be on my merry way. (Yes, I know this is a terrible idea from a risk perspective, but the data on this machine will be transient, it just needs to have a ton of storage).
However, looking at the 410i data sheet, it appears that they list the maximum configuration as for SATA disks is a 24x500GB for 12TB. Does this mean that a 4x2TB option won't work? If not, is there any way to put a combination of disks into this machine that will look like a single 8TB drive to the OS?
I apologize if any of these questions are silly, I don't typically spec out servers so I'm a bit lost here.
Best Answer
Your 4x2TB option should work. You may have to play with GUID partition tables to make all of that presentable as a single 8TB volume, though. A better option in my opinion if you insist on RAID 0 for the dataset, is to create a RAID 1 OS Logical Drive drive of say, 200GB and a second Logical Drive set to RAID 0, comprised of the remaining space. Smart Array controllers allow you mix RAID levels on the same set of drives. At least this will protect your OS setup, even if the data is not important.