I'm using a Mikrtotik RB201UiAS to manage my network.
To avoid creating simple queues for every IP i have created queues for ranges of IPs.
- Target: 172.16.2.0/25
- Dst: ether1
- Target Upload: 5M
- Target Download: 5M
The question is: Using this configuration
- each IP (From 1 to 127) will have a limit of 5M Tx/Rx
or
- all IPs (From 1 to 127) will have a limit of 5M Tx/Rx
Current configuration:
# oct/21/2015 15:25:55 by RouterOS 6.23
# software id = U3SW-9LU3
#
/queue simple
add dst=ether1 max-limit=5M/10M name=Klasat target=172.16.2.0/25
add dst=ether1 max-limit=5M/10M name=Administrata target=172.16.2.128/26
add dst=ether1 max-limit=1M/1M name=DVR target=172.16.2.192/27
add dst=ether1 name=Sallat target=172.16.2.224/28 add dst=ether1 name=Unlimited target=172.16.2.240/28
Best Answer
Unless you are using PCQ queue type, then the limits are applied to all IPs in the defined range.
With PCQ (Per Connection Queue) you can apply the desired limits on each IP based on the criteria you define on the PCQ (dst/src address, dst/src port, or any combination of those).
From MikroTik official documentation:
There is also an example available at MikroTik Wiki
Wiki excerpt: