Mixing SAS 6Gbps and 12Gbps on same expander

lsiraidsassata

We are building up some new servers and want to use 12Gbps SAS3 drives alongside some SATA 6Gbps Enterprise SSD's attached to a single Supermicro SAS3 backplane using an LSI SAS3 Expander and LSI / Broadcom 9361-8i RAID Controller with CacheCade Pro 2.0.

RAID Config will be as follows

  • Array 1: 2 x SATA3 SSDs RAID1
  • Array 2: 2 x SATA3 SSDs RAID1
  • Array 3: 6 x SAS3 HDDs RAID10
  • CacheCade Pro 2.0 attached to Array 3: 2 x SATA3 SSDs

Question 1: Will 12Gbps and 6Gbps drives play nicely on the same 12gpbs expander and controller without compromising performance?

Question 2: Should I use interposers on the SATA3 SSDs to achieve the RAID config outlined above?

Best Answer

Will 12Gbps and 6Gbps drives play nicely on the same 12gpbs expander and controller

Yes

without compromising performance?

No, the 12Gbps SAS drives will drop down to 6Gbps.

Should I use interposers on the SATA3 SSDs to achieve the RAID config outlined above?

Not in my mind no, they add a great deal of additional 'moving parts' that could easily break and cause you data issues. That said I also don't like mixing SATA and SAS together, especially not on the same bus/expander. I'd be very much tempted to either run each type on separate, and separately-cabled, expanders or if that's not possible internally to buy an external shelf and run on type of disk on that.

Related Topic