We have a MySQL server running on an Amazon EC2 c1.medium instance relying on a single EBS volume using the ext3 filesystem for storage.
This MySQL server is queried ~500/ps by several applications running on some web servers, which are also at the Amazon EC2.
As you can see below, server's load avg and processor idle time seems fine, but there's something disturbing and worrying me right now, which is the high iowait it's been experiencing.
Another number that worried me a lot is the number of iostat's transfers per second (tps), which stays above 450 most of the time. After doing some research on this topic, I saw some people saying that this is ask too much of a EBS volume: https://forums.aws.amazon.com/thread.jspa?threadID=30769
By the way, the command outputs you'll see below were not captured in a peak time. That's the way the server behaves/performs most of the time.
Well, all said, here go my questions:
1- Is it time to consider moving for a RAID architecture (I'd say RAID 0)?
2- Should I spent time on a clustering solution such as MySQL Cluster?
3- Do you believe such scenario is heavily impacting our apps? Would they perform much better in case we move to a RAID 0 and/or cluster solution? (Seems that the apps are happy so far, but would they be happier?)
Please let me know if you need any further information.
~ # uptime
12:34:14 up 2 days, 4:06, 1 user, load average: 2.24, 1.90, **1.84**
########################################################
~ # vmstat 5
procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------
r b swpd free buff cache si so bi bo in cs us sy id **wa** st
0 1 52 11168 16420 1498728 0 0 4586 231 11 81 6 3 52 39 0
2 1 52 10460 16320 1499588 0 0 11631 397 3194 4319 10 4 47 39 0
4 1 52 11448 16064 1499156 0 0 12231 592 2301 3331 9 5 50 36 0
4 0 52 10328 16068 1500176 0 0 8578 392 2131 2745 8 6 49 37 0
0 1 52 11164 15732 1499928 0 0 9604 578 2609 3510 7 4 49 40 0
0 1 52 10824 15768 1499836 0 0 5038 634 1912 2509 8 3 47 42 0
3 1 52 12040 15888 1498096 0 0 5068 204 1927 2531 10 8 45 37 0
8 2 52 11252 15784 1499272 0 0 8521 390 2437 3100 14 15 39 31 0
1 2 52 11436 15724 1499748 0 0 8287 401 2159 3113 11 10 42 36 1
0 1 52 12016 15704 1498752 0 0 11576 499 3324 3984 16 17 31 36 0
1 1 52 10536 15664 1500508 0 0 8430 718 2686 3265 15 14 37 34 0
1 1 52 10300 15676 1500744 0 0 10186 720 2488 3488 16 5 45 34 0
########################################################
~ # iostat -dm 5 /dev/sdf
Linux 2.6.21.7-2.fc8xen (database-new) 01/20/12
Device: tps MB_read/s MB_wrtn/s MB_read MB_wrtn
sdf 464.81 8.84 0.33 1658860 61390
Device: tps MB_read/s MB_wrtn/s MB_read MB_wrtn
sdf 402.20 7.39 0.43 36 2
Device: tps MB_read/s MB_wrtn/s MB_read MB_wrtn
sdf 431.40 7.74 0.32 38 1
Device: tps MB_read/s MB_wrtn/s MB_read MB_wrtn
sdf 461.40 8.26 0.39 41 1
Device: tps MB_read/s MB_wrtn/s MB_read MB_wrtn
sdf 475.65 9.20 0.29 46 1
Device: tps MB_read/s MB_wrtn/s MB_read MB_wrtn
sdf 534.80 9.82 0.52 49 2
Device: tps MB_read/s MB_wrtn/s MB_read MB_wrtn
sdf 526.60 9.97 0.52 49 2
########################################################
~ # iostat -mdx 5 /dev/sdf
Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await svctm %util
sdf 22.21 46.28 427.47 37.54 8.84 0.33 40.38 1.78 3.82 1.72 79.87
Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await svctm %util
sdf 22.36 80.04 450.30 60.48 9.29 0.55 39.44 1.45 2.85 1.58 80.48
Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await svctm %util
sdf 23.40 43.60 370.60 47.00 7.75 0.35 39.76 1.45 3.47 1.97 82.08
Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await svctm %util
sdf 20.20 33.20 382.60 29.60 8.02 0.25 41.05 1.31 3.17 2.11 87.12
Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await svctm %util
sdf 28.80 35.20 422.40 33.40 9.04 0.27 41.80 1.45 3.19 1.95 88.96
Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await svctm %util
sdf 14.20 45.00 291.80 51.40 5.97 0.38 37.86 1.45 4.22 2.50 85.68
Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await svctm %util
sdf 19.16 56.89 535.33 41.32 11.44 0.38 42.00 1.49 2.59 1.53 88.46
Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await svctm %util
sdf 20.40 81.40 233.00 64.40 4.86 0.57 37.39 1.74 5.84 3.18 94.72
################################################## my.cnf
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
user=mysql
long_query_time=1
key_buffer = 64M
thread_cache_size = 30
table_cache = 1024
table_definition_cache = 512
query_cache_type = 1
query_cache_size = 64M
tmp_table_size = 64M
max_heap_table_size = 64M
innodb_buffer_pool_size = 512M
old_passwords=1
max_connections=400
wait_timeout=30
[mysqld_safe]
log-error=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
[ndbd]
connect-string="nodeid=2;host=localhost:1186"
[ndb_mgm]
connect-string="host=localhost:1186"
################################################## sundry's tuning script output
~ # ./tuning-primer.sh
-- MYSQL PERFORMANCE TUNING PRIMER --
- By: Matthew Montgomery -
MySQL Version 5.1.52 i686
Uptime = 0 days 1 hrs 1 min 1 sec
Avg. qps = 517
Total Questions = 1894942
Threads Connected = 94
Warning: Server has not been running for at least 48hrs.
It may not be safe to use these recommendations
To find out more information on how each of these
runtime variables effects performance visit:
http://dev.mysql.com/doc/refman/5.1/en/server-system-variables.html
Visit http://www.mysql.com/products/enterprise/advisors.html
for info about MySQL's Enterprise Monitoring and Advisory Service
SLOW QUERIES
The slow query log is NOT enabled.
Current long_query_time = 1.000000 sec.
You have 207 out of 1894981 that take longer than 1.000000 sec. to complete
Your long_query_time seems to be fine
BINARY UPDATE LOG
The binary update log is NOT enabled.
You will not be able to do point in time recovery
See http://dev.mysql.com/doc/refman/5.1/en/point-in-time-recovery.html
WORKER THREADS
Current thread_cache_size = 30
Current threads_cached = 8
Current threads_per_sec = 0
Historic threads_per_sec = 0
Your thread_cache_size is fine
MAX CONNECTIONS
Current max_connections = 400
Current threads_connected = 93
Historic max_used_connections = 195
The number of used connections is 48% of the configured maximum.
Your max_connections variable seems to be fine.
INNODB STATUS
Current InnoDB index space = 1.33 G
Current InnoDB data space = 5.04 G
Current InnoDB buffer pool free = 0 %
Current innodb_buffer_pool_size = 512 M
Depending on how much space your innodb indexes take up it may be safe
to increase this value to up to 2 / 3 of total system memory
MEMORY USAGE
Max Memory Ever Allocated : 1.13 G
Configured Max Per-thread Buffers : 1.04 G
Configured Max Global Buffers : 642 M
Configured Max Memory Limit : 1.67 G
Physical Memory : 1.70 G
Max memory limit exceeds 90% of physical memory
KEY BUFFER
Current MyISAM index space = 379 M
Current key_buffer_size = 64 M
Key cache miss rate is 1 : 162
Key buffer free ratio = 80 %
Your key_buffer_size seems to be fine
QUERY CACHE
Query cache is enabled
Current query_cache_size = 64 M
Current query_cache_used = 43 M
Current query_cache_limit = 1 M
Current Query cache Memory fill ratio = 67.44 %
Current query_cache_min_res_unit = 4 K
MySQL won't cache query results that are larger than query_cache_limit in size
SORT OPERATIONS
Current sort_buffer_size = 2 M
Current read_rnd_buffer_size = 256 K
Sort buffer seems to be fine
JOINS
Current join_buffer_size = 132.00 K
You have had 4013 queries where a join could not use an index properly
You should enable "log-queries-not-using-indexes"
Then look for non indexed joins in the slow query log.
If you are unable to optimize your queries you may want to increase your
join_buffer_size to accommodate larger joins in one pass.
Note! This script will still suggest raising the join_buffer_size when
ANY joins not using indexes are found.
OPEN FILES LIMIT
Current open_files_limit = 2458 files
The open_files_limit should typically be set to at least 2x-3x
that of table_cache if you have heavy MyISAM usage.
Your open_files_limit value seems to be fine
TABLE CACHE
Current table_open_cache = 1024 tables
Current table_definition_cache = 512 tables
You have a total of 45237 tables
You have 1024 open tables.
Current table_cache hit rate is 0%
, while 100% of your table cache is in use
You should probably increase your table_cache
You should probably increase your table_definition_cache value.
TEMP TABLES
Current max_heap_table_size = 64 M
Current tmp_table_size = 64 M
Of 38723 temp tables, 44% were created on disk
Perhaps you should increase your tmp_table_size and/or max_heap_table_size
to reduce the number of disk-based temporary tables
Note! BLOB and TEXT columns are not allow in memory tables.
If you are using these columns raising these values might not impact your
ratio of on disk temp tables.
TABLE SCANS
Current read_buffer_size = 128 K
Current table scan ratio = 537 : 1
read_buffer_size seems to be fine
TABLE LOCKING
Current Lock Wait ratio = 1 : 954
You may benefit from selective use of InnoDB.
If you have long running SELECT's against MyISAM tables and perform
frequent updates consider setting 'low_priority_updates=1'
If you have a high concurrency of inserts on Dynamic row-length tables
consider setting 'concurrent_insert=2'.
Best Answer
It would help if you posted your my.cnf and whether you are using InnoDB or MyISAM tables and whether you are a read-heavy or write-heavy workload. Otherwise, we are just making guesses. Here are mine:
First, I would look and make sure that your queries are properly indexed. High I/O on MySQL databases is either caused by extremely high concurrency, a poorly tuned server, or by poorly performing queries that have to do full table or index scans. Some hints on how to find the poorly performing queries can be found in my post on Ideeli's technical blog.
Check your my.cnf. If you are using InnoDB, make sure innodb_buffer_pool_size and innodb_log_file_size are sufficiently large. Because EBS has such variable latency, maxing out innodb_log_file_size can have substantial performance benefits. If you are using MyISAM (and you shouldn't), make sure your key_buffer size is large enough.
If you are confident that your queries are well optimized, and your server is well-tuned, we can move on to the next item. ext3 is less than ideal for databases. One of the main reasons for this is that ext3 only allows a single thread to update an inode at a time (trying to find documentation for this). If you aren't running with innodb-file-per-table, this means that there is a ton of filesystem contention on the ibdata file. xfs does not have this limitation and has been shown to perform much better (need source) for database workloads.
If you can't change to xfs, make sure that you are using innodb-file-per-table and at a minimum, make sure that you have noatime,nodiratime on the mount.
Next, on to your instance size. A c1.medium is not an ideal instance size for most databases unless the data set is tiny. MySQL ordinarily will benefit from memory over compute power. c1.medium only has 1.7GB of RAM! How big is your data set? In general, a m1.large (with 7.5GB of RAM) will outperform a c1.medium except in very rare cases. It is also twice as expensive, at $0.34/hr.
Now on to RAID of EBS volumes. Yes, RAID will greatly increase your IOPS. (As will increasing your instance size). Do not RAID0...If you care about your data, at least. I have explained this in many places, including on my blog, as a speaker at Percona Live NYC in 2011, and here on serverfault. The short version is that EBS volumes fail in atypical ways and being able to remove a volume from the set has proven to be valuable on serveral occasions, most notably during the great EBS outage of 2011 where some sites were offline for several days...We were offline for 45 minutes at 4AM despite having dozens of instances affected by the EBS issue.
Here are some benchmarks for RAIDed EBS volumes using MySQL.
Finally, Percona Server has a huge number of scalability optimizations. Here is a white paper about my company's experience when switching from MySQL to Percona Server. We were experiencing database stalls and outages every day. Simply switching to Percona Server from MySQL resolved that issue literally overnight due to a number of scalability improvements.
So, in summary...
As for MySQL Cluster, it's a completely different animal than MySQL and generally not suitable for most OLTP applications. Galera/Percona XtraDB Cluster are new and interesting clustering products, as well. You have a lot of options before you get to any of this, however. We served 24k qps at peak from a single m2.4xlarge with RAID10 in EC2.
Good luck!