I'm trying to setup nginx 1.7.3 to send logs to syslog, but when I this configuration:

server {
    access_log syslog:server=localhost;
}

this shows up in nginx's error log:

2015/01/15 21:42:47 [error] 16776#0: send() failed (111: Connection refused)
2015/01/15 21:42:48 [error] 16776#0: send() failed (111: Connection refused)
2015/01/15 21:42:50 [error] 16776#0: send() failed (111: Connection refused)

I've followed http://nginx.org/en/docs/syslog.html and tried different parameter specified in there, but no luck…

The server runs rsyslogd daemon and other applications (cron, mysql) logs there without any issue.

/etc/rsyslogd.conf

#  /etc/rsyslog.conf    Configuration file for rsyslog.
#
#                       For more information see
#                       /usr/share/doc/rsyslog-doc/html/rsyslog_conf.html


#################
#### MODULES ####
#################

$ModLoad imuxsock # provides support for local system logging
$ModLoad imklog   # provides kernel logging support
#$ModLoad immark  # provides --MARK-- message capability

# provides UDP syslog reception
#$ModLoad imudp
#$UDPServerRun 514

# provides TCP syslog reception
#$ModLoad imtcp
#$InputTCPServerRun 514


###########################
#### GLOBAL DIRECTIVES ####
###########################

#
# Use traditional timestamp format.
# To enable high precision timestamps, comment out the following line.
#
$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat

#
# Set the default permissions for all log files.
#
$FileOwner root
$FileGroup adm
$FileCreateMode 0640
$DirCreateMode 0755
$Umask 0022

#
# Where to place spool and state files
#
$WorkDirectory /var/spool/rsyslog

#
# Include all config files in /etc/rsyslog.d/
#
$IncludeConfig /etc/rsyslog.d/*.conf


###############
#### RULES ####
###############

#
# First some standard log files.  Log by facility.
#
auth,authpriv.*                 /var/log/auth.log
*.*;auth,authpriv.none          -/var/log/syslog
#cron.*                         /var/log/cron.log
daemon.*                        -/var/log/daemon.log
kern.*                          -/var/log/kern.log
lpr.*                           -/var/log/lpr.log
mail.*                          -/var/log/mail.log
user.*                          -/var/log/user.log

#
# Logging for the mail system.  Split it up so that
# it is easy to write scripts to parse these files.
#
mail.info                       -/var/log/mail.info
mail.warn                       -/var/log/mail.warn
mail.err                        /var/log/mail.err

#
# Logging for INN news system.
#
news.crit                       /var/log/news/news.crit
news.err                        /var/log/news/news.err
news.notice                     -/var/log/news/news.notice

#
# Some "catch-all" log files.
#
*.=debug;\
        auth,authpriv.none;\
        news.none;mail.none     -/var/log/debug
*.=info;*.=notice;*.=warn;\
        auth,authpriv.none;\
        cron,daemon.none;\
        mail,news.none          -/var/log/messages

#
# Emergencies are sent to everybody logged in.
#
*.emerg                         :omusrmsg:*

#
# I like to have messages displayed on the console, but only on a virtual
# console I usually leave idle.
#
#daemon,mail.*;\
#       news.=crit;news.=err;news.=notice;\
#       *.=debug;*.=info;\
#       *.=notice;*.=warn       /dev/tty8

# The named pipe /dev/xconsole is for the `xconsole' utility.  To use it,
# you must invoke `xconsole' with the `-file' option:
#
#    $ xconsole -file /dev/xconsole [...]
#
# NOTE: adjust the list below, or you'll go crazy if you have a reasonably
#      busy site..
#
daemon.*;mail.*;\
        news.err;\
        *.=debug;*.=info;\
        *.=notice;*.=warn       |/dev/xconsole