Procurve VLAN configuration

hp-procurvevlan

I have two ProCurve 1800-24G J9028B linked toghether by a fiber channel on ports n.23. I want an ethernet port (ex. port 21 of switch n1) to be isolated from all the others except of one of the other switch (ex. port 21 of switch n2).
How to setup this VLAN by web interface? May i just add ports 21 to VLAN2 or I have also to add the 23 (fiber link) port?

Thank you.

Best Answer

Both ports neem to be member of the same VLAN group, the fiber port needs to be member as well.

So:

Switch 1 port 21 - Groupmember of VLAN2
Switch 2 Port 21 - Groupmember of VLAN2
Switch 1 Port 23 (FC Trunck) - groupmember of VLAN2
Switch 2 Port 23 (FC Trunck) - groupmember of VLAN2

you will need to set the 21 ports to be tagged with VLAN2 ID, otherwise not a lot will happen

Related Topic