RAID – Confusion Between MegaCli and megasasctl Output

I'm utterly new to working with LSI MegaRAID controllers and I'm confused as to what RAID level I am actually running. My server is equipped with 4 disks, 4TB each and I would like to have them running in RAID-10.
Searching around for some hints I've found this thread and followed the link in one of the answers.

Now, what confuses me is the output of megacli and megasasctl:

# megacli -LDInfo -Lall -aALL | grep RAID
RAID Level          : Primary-1, Secondary-0, RAID Level Qualifier-0

According to the table this should mean I am currently running RAID-1. However according to this I am running RAID-10:

# megasasctl
a0       LSI MegaRAID SAS 9260-4i encl:1 ldrv:1  batt:FAULT, module missing, pack missing, charge failed
a0d0      7451GiB RAID 10  2x2  optimal
a0e252s0   3726GiB  a0d0  online  
a0e252s1   3726GiB  a0d0  online  
a0e252s2   3726GiB  a0d0  online  
a0e252s3   3726GiB  a0d0  online  

My confusion on this probably couldn't be worse.What am I missing here and which output is the one to be believed?

EDIT (in reply to CharlesH's request)

The output is as follows:

# megacli -LDInfo -Lall -aall


Adapter 0 -- Virtual Drive Information:
Virtual Drive: 0 (Target Id: 0)
Name                :
RAID Level          : Primary-1, Secondary-0, RAID Level Qualifier-0
Size                : 7.276 TB
Sector Size         : 512
Is VD emulated      : Yes
Mirror Data         : 7.276 TB
State               : Optimal
Strip Size          : 256 KB
Number Of Drives per span:2
Span Depth          : 2
Default Cache Policy: WriteBack, ReadAhead, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteThrough, ReadAhead, Direct, No Write Cache if Bad BBU
Default Access Policy: Read/Write
Current Access Policy: Read/Write
Disk Cache Policy   : Disk's Default
Encryption Type     : None
Bad Blocks Exist: No
Is VD Cached: No



Exit Code: 0x00