Sendmail and domain issue

Where are the logs?

The default location depends on your linux/unix system, but the most common places are

• /var/log/maillog
• /var/log/mail.log
• /var/adm/maillog
• /var/adm/syslog/mail.log

If it's not there, look up /etc/syslog.conf. You should see something like this

mail.*         -/var/log/maillog

sendmail writes logs to the mail facility of syslog. Therefore, which file it gets written to depends on how syslog was configured.

If you system uses syslog-ng (instead of the more "traditional" syslog), then you'll have to look up your syslog-ng.conf file. You'll should something like this:

# This files are the log come from the mail subsystem.
#
destination mail     { file("/var/log/mail.log"); };
destination maillog  { file("/var/log/maillog"); };
destination mailinfo { file("/var/log/mail.info"); };
destination mailwarn { file("/var/log/mail.warn"); };
destination mailerr  { file("/var/log/mail.err"); };

Unable to send out emails?

One of the most common reason I've seen for a freshly installed sendmail not being able to send out emails is the DAEMON_OPTIONS being set to listen only on 127.0.0.1

See /etc/mail/sendmail.mc

dnl #
dnl # The following causes sendmail to only listen on the IPv4 loopback address
dnl # 127.0.0.1 and not on any other network devices. Remove the loopback
dnl # address restriction to accept email from the internet or intranet.
dnl #
DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl

If that's your case, remove the "Addr=127.0.0.1" part, rebuild your conf file and you're good to go!

DAEMON_OPTIONS(`Port=smtp, Name=MTA')dnl

[root@server]$ m4 sendmail.mc > /etc/sendmail.cf
[root@server]$/etc/init.d/sendmail restart

If you've been making changes to /etc/sendmail.cf manually thus far (instead of the *.m4 file) you can make similar changes in /etc/sendmail.cf. The offending line will look like this:

O DaemonPortOptions=Port=smtp,Addr=127.0.0.1, Name=MTA

Change it to:

O DaemonPortOptions=Port=smtp, Name=MTA

If this is a mail from you:

Date: Thu, 21 Oct 2010 14:56:03 -0400
From: root <root@dev.tridiumtech.com>
To: reaper@teaparty.net
Subject: Test

Test

which based on your profile I suspect it is, then whatever the problem on your system, it's not with sendmail. Your sendmail is configured fine as regards outbound email.

That said, clearly something doesn't work, or you wouldn't have posted. Would you care to edit your question, or open a new one, saying what you know (what you're trying to achieve, what you're doing, what's happening), rather than what you think might be the underlying cause?