I know that adding the Hyper-V role to a Small Business Server 2008 installation is not supported as stated by Microsoft Support (KB 958829). I'm aware that I can use Virtual Server 2005 to host my testing virtual machines on SBS 2008 if I have to.
Nevertheless I was wondering if anyone has been able to fix the resulting networking issue (DHCP binding to the virtual adapter instead of the real adaptor) to allow for this very appealing scenario to work?
Does anyone know if a Windows Server 2008 R2-based version of SBS 2008 will not have this Hyper-V role limitation?
Best Answer
We've put Hyper-V on SBS. In these days where servers are ridiculously powerful it seems an obvious option and we've found it to work just fine as long as you don't run anything too heavy in the VMs.
We use Dells that have two NICs built in. We set up SBS with NIC2 disabled. Once it's all working enable NIC2 then install Hyper-V (and reboot). Now create a Hyper-V network on NIC2, then on the host disable the resulting synthetic NIC.
So the host now has NIC1 untouched by Hyper-V and used for the normal SBS operations, and a disabled synthetic NIC. DHCP and indeed all aspects of SBS work fine. The VMs use the virtual network on NIC2. Disabling the synthetic NIC on the host does not affect the VMs.
JR