See attached diagram.
- Host A – Windows server
- Host B – Linux server
- Host C – VMWare ESXi server
From host A I can SSH to host B over the VPN tunnel. I can ping host C from host B, but not from host A. I am assuming this is because host C has lost its default gateway.
Host C is a VMWware ESXi server, so I would need to tunnel several ports (80,443,902) in order to reach host C from host A.
What is the correct ssh syntax to create the tunnel in order to reach host C from host A, and can I do it using a single command, or do I need to run three commands (one for each port, 80,443,902)?
Best Answer
Here's how I accomplished this.
Then these commands:
Then pointed the vSphere client on Host A to 10.18.3.20, which connected me to 10.18.3.10 and I was able to change the default gateway.