SSH Tunnel using PuTTY no longer works after server change

puttyssh

EDIT (for clarification)

              Windows Client                  Remote Linux Server
 |----------------------------------|       |---------------------|
 ____________            ____________            ____________  
|            |          |            |          |            | 
| Firefox    | -------> | PuTTY      | -------> | sshd       | ---> (The Internet)
|____________|          |____________|          |____________| 
Network settings:    Interactive SSH Session     sshd_config
Manual Proxy:        (manual login)              posted below 
SOCKS Host:          Configuration Settings:
localhost:9870       Connection|SSH|Tunnels
                     set to D9870

The above configuration worked perfectly fine until our ISP changed the server to a
new one. By "perfectly fine" I mean I could browse the entire internet, including websites normally blocked in China. It still works perfectly fine when I login to another SSH session on another server as a test (a production web-server, not one I can purpose for this). In all cases the manual SSH login works as normal.

I need to figure out why it doesn't work with the new server since the sole purpose of that server is to provide this function to our company.

PREVIOUS POSTING

Our server provider recently changed our server and IP address. The hard-disk from the old server was moved to the new one, and the configuration was supposed to be identical other than the IP address change.

Prior to the move I was using PuTTY on a Windows box to tunnel web-traffic as a SOCKS proxy through the server using a Dynamic port set as 9870. After the move, I reconfigured the PuTTY to point to the new IP. But the tunnel no longer works (times out when requesting pages in Firefox).

I don't have access to the old server. But the sshd_config on the new server is:

#       $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options change a
# default value.

#Port 22
#Protocol 2,1
Protocol 2
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::

# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key

# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 768

# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
SyslogFacility AUTHPRIV
#LogLevel INFO

# Authentication:

#LoginGraceTime 2m
#PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6

#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile     .ssh/authorized_keys

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
PasswordAuthentication yes

# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
ChallengeResponseAuthentication no

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no

# GSSAPI options
#GSSAPIAuthentication no
GSSAPIAuthentication yes
#GSSAPICleanupCredentials yes
GSSAPICleanupCredentials yes

# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication mechanism.
# Depending on your PAM configuration, this may bypass the setting of
# PasswordAuthentication, PermitEmptyPasswords, and
# "PermitRootLogin without-password". If you just want the PAM account and
# session checks to run without PAM authentication, then enable this but set
# ChallengeResponseAuthentication=no
#UsePAM no
UsePAM yes

# Accept locale-related environment variables
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#ShowPatchLevel no
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no

# no default banner path
#Banner /some/path

# override default of no subsystems
Subsystem       sftp    /usr/libexec/openssh/sftp-server

EDIT:-

So far I have tried all the suggestions in the responses. Still not working. Is it possible the firewall at the datacenter where the server is hosted is preventing the ssh-tunnel? I have tried D80 as my dynamic port in PuTTY, but this also doesn't work (should it?). The server is primarily a web-server, but currently we are not running any websites on it, although Apache is running.

I have looked in the putty.log and although I can't make much sense of it, there is the following section:

Event Log: Opened channel for session
Event Log: Local port 9870 SOCKS dynamic forwarding
Outgoing packet type 98 / 0x62 (SSH2_MSG_CHANNEL_REQUEST)
  00000000  00 00 00 00 00 00 00 07 70 74 79 2d 72 65 71 01  ........pty-req.
  00000010  00 00 00 05 78 74 65 72 6d 00 00 00 50 00 00 00  ....xterm...P...
  00000020  18 00 00 00 00 00 00 00 00 00 00 00 10 03 00 00  ................
  00000030  00 7f 80 00 00 96 00 81 00 00 96 00 00           .............
Outgoing raw data
  00000000  ed 9b 4d c5 0c 7f c4 67 e7 ad 96 3f 5a fd 26 fb  ..M....g...?Z.&.
  00000010  48 27 cd e9 b9 bd 4f 52 2c e0 d3 4e de 62 5d ab  H'....OR,..N.b].
  00000020  c0 10 51 a9 80 8e 68 9c 6d 4c bf ab 75 e9 e1 7a  ..Q...h.mL..u..z
  00000030  bf 66 e3 ff 6f 94 fe f9 9e 78 3d b5 e0 a6 8c fd  .f..o....x=.....
  00000040  61 5b 69 b4 ec 7c 30 a0 29 87 9c 2c d2 94 57 bd  a[i..|0.)..,..W.
  00000050  6e 4b 9c 6c d0 39 cc 46 66 3c 5d 7d dc 37 76 cf  nK.l.9.Ff<]}.7v.
  00000060  9b c7 24 46                                      ..$F
Incoming raw data
  00000000  30 ae 0c b2 25 a9 c1 73 47 1f 2d 6a 5e 5b 7f 88  0...%..sG.-j^[..
  00000010  99 99 0c 28 ff 87 5b 0e 82 61 f5 33 81 3d 8a 7d  ...(..[..a.3.=.}
  00000020  d6 b7 3d 6f                                      ..=o
Incoming packet type 99 / 0x63 (SSH2_MSG_CHANNEL_SUCCESS)
  00000000  00 00 01 00      ............

Which to me seems to look like the port-forwarding was accepted by the remote server.

FURTHER EDIT:-

I have tried connecting to another server that I regularly SSH to with exactly the same SSH tunnels setting in PuTTY (D9870)

This worked instantly (with Firefox seeing PuTTY it as a SOCKS proxy) and I was immediately able to access sites being blocked in my location [China].

What was most interesting about this test was that the netstat -an –inet test prescribed by respondents below on the server also did not show 127.0.0.1:9870.

I think I need to point out clearly that I'm using a Windows machine for the PuTTY/Firefox client. And I'm trying to use the remote Linux server to tunnel web-traffic through so I can securely get access to websites being blocked in China. It seems to me that the netstat test suggested was supposed to be run on my Windows box (in which case it's using the wrong netstat syntax).

Best Answer

At rwired's request, I'm reposting my previous comment as an answer, which was:

Can the remote Linux server establish outbound connections to TCP port 80? For instance, if you "telnet www.google.com 80" from the server, do you get "Connection established"? Or does it just hang?

The intended implication was that something is blocking the outbound connection, which rwired discovered was indeed the case.

Related Solutions

Sshd on mac does no longer accept connections in inetd (-i) mode, but does in do not detach mode (-D), how to fix

It's pretty non-standard to use initd to start anything on a Mac. Instead, launchd is used, kicking off sshd in an ad hoc fashion (ie, it doesn't run as a typical server daemon until there's knock on the door). I suspect that your use of Linux-centric Webmin to manage ssh is contributing to the problem, since Webmin doesn't know a whole lot about launchd.

First, make sure the ssh launchd item is configured to load, just to eliminate the obvious.

sudo launchctl load -w /System/Library/LaunchDaemons/ssh.plist

This is akin to ticking the box on Server Admin.app in the Settings options to enable SSH. Check syslog to see if launchctl is complaining about something.

It's unclear why you would want Webmin to handle SSH, but Apple's default configuration might be illuminating.

There's a launchd item in /System/Library/LaunchDaemons called sshd.plist. This XML file indicates that /usr/libexec/sshd-keygen-wrapper is used as the "program" that actually kicks off /usr/sbin/sshd using the -i flag. (The sshd-keygen-wrapper program is a shell script to first set up initial rsa and dsa keys in empty user home dirs.) The sshd-keygen-wrapper, however, also kicks off sshd like exec /usr/sbin/sshd $@ and is a trusted/whitelisted program as far as the socket firewall is concerned.

You might also want to grab the default /etc/sshd_config from backup or another machine to eliminate that as a variable in troubleshooting.

Ubuntu – Loggin in ssh server: Permission denied, please try again

Are you certain that the user account you're attempting to access is correctly configured? If you log in as root on the system, can you su to the user account?

# su - username

What do you see in your logs after a failed connection attempt? On many systems, sshd will log to something /var/log/secure or /var/log/auth.log. Also, I note that you have PasswordAuthentication enabled but ChallengeResponseAuthentication disabled. Do you see the same behavior if you enable ChallengeResponseAuthentication?

Here are some general diagnostic steps to use when you have ssh problems:

Enable verbose diagnostics in ssh:
```
ssh -v host.example.com
```
This will cause the client to output a variety of diagnostic messages as it negotiates the connection. This will often provide a clue to the problem.
Run the server in debug mode.

On your server, stop sshd, then run it from the command line like this:
```
/usr/sbin/sshd -d
```
This will produce verbose debug logging on stderr that will very often contain useful information.

If neither of these helps you figure out what's going on, would you add the output to your question?

Best Answer

Related Solutions

Sshd on mac does no longer accept connections in inetd (-i) mode, but does in do not detach mode (-D), how to fix

Ubuntu – Loggin in ssh server: Permission denied, please try again

Related Topic