Switch – Link Aggregation with 3 switches

lacploop-deviceswitch

I am new in networking. Sorry for my ignorance.

I have three switches.

Switch 1 has 4 ports. Two of them connected to switch 2. And the other two ports are connected to switch 3. All these four ports are in the same link aggregation group. (I am using LACP by the way).

The same configuration was made in switch 2 and switch 3. (Switch 2 has 4 ports. Two of them connected to switch 1. And other two port is connected to switch 3. All these four ports in same link aggregation group.)

I am not using spanning tree protocol. Also for link aggregation protocol, I am using src ip to dest mac address configuration.

Each switch is connected to at most three computers.

Does this configuration of switches create loops?

enter image description here

Best Answer

Yes, unless you use spanning tree (or a vendor specific equivalent like EAPS) to create a loop free network you will have problems, LACP does in no way help you to prevent loops, it was not designed to do so.

You either make one of the paths in the triangle blocking with spanning tree, or perhaps (if your equipment supports this) create a virtual chassis using techniques like TRILL, FabricPath, Qfabric or VCS which allows you to connect all switches loop free.

Related Topic