I'm unable to sync with ntp server. Any suggestions on how to force the ntpdate to work and sync?
ntp.conf on clients are default with only the server
address changed.
ntpdate -dv 10.10.10.10
26 Sep 04:33:56 ntpdate[18934]: ntpdate 4.2.2p1@1.1570-o Mon Dec 9 14:35:05 UTC 2013 (1)
Looking for host 10.10.10.10 and service ntp
host found : 10.10.10.10
transmit(10.10.10.10)
receive(10.10.10.10)
transmit(10.10.10.10)
receive(10.10.10.10)
transmit(10.10.10.10)
receive(10.10.10.10)
transmit(10.10.10.10)
receive(10.10.10.10)
transmit(10.10.10.10)
10.10.10.10: Server dropped: Server has gone too long without sync
server 10.10.10.10, port 123
stratum 3, precision -22, leap 00, trust 000
refid [10.10.10.10], delay 0.02588, dispersion 0.00000
transmitted 4, in filter 4
reference time: ded53aa8.03ff145c Wed, Jun 20 2018 20:42:16.015
originate timestamp: df558ac2.571e7c56 Wed, Sep 26 2018 4:34:10.340
transmit timestamp: df558ab4.779ebe9c Wed, Sep 26 2018 4:33:56.467
filter delay: 0.02611 0.02589 0.02588 0.02591
0.00000 0.00000 0.00000 0.00000
filter offset: 13.87284 13.87281 13.87281 13.87279
0.000000 0.000000 0.000000 0.000000
delay 0.02588, dispersion 0.00000
offset 13.872814
26 Sep 04:33:56 ntpdate[18934]: no server suitable for synchronization found
Best Answer
Note the reference time received back from the server: Wed, Jun 20 2018 20:42:16.015 - that means that the server has not syned with its upstream(s) since that time.
ntpdate
considers this too long ago and will not sync with that server because it's probably giving bad time. To fixntpdate
you need to fix the server.