What does the following IPMI error mean: Processor /CATERR (#0x68)

Reset does a warm boot. Cycle completely powers off the machine then powers it back on, which has the server go through a cold boot.

I manage a lot of SuperMicro servers using the onboard IPMI. I have a love/hate relationship with the shared (aka sideband) ethernet. In general, the way these things work is that LAN1 appears to have 2 (different) MAC addresses - one is for the IPMI interface, the other your standard Broadcom NIC. Traffic to the IPMI interface (layer 2, based on the MAC address) is magically intercepted below the operating system level and never seen by whatever OS is running.

You've already hit on the one good point for them: less cabling. Now let me cover some of the downsides:

• It's particularly difficult to partition the IPMI interface onto a separate subnet in a secure manner. Since the traffic all goes over the same cable, you (almost) always have to have the IPMI interface and the LAN1 interface on the same IP subnet. On the latest motherboards, the IPMI cards now support assigning a VLAN to the IPMI NIC, so you can get some semblance of separation - but the underlying OS could always sniff the traffic for that VLAN. Older BMC controllers don't allow changing the VLAN at all, although tools like ipmitool or ipmicfg will ostensibly let you change it, it just doesn't work.
• You're centralizing your failure points on the system. Doing configuration on a switch and manage to cut yourself off somehow? Congratulations, you've now cut off the primary network connection to your server AND the backup via IPMI. NIC hardware fail? Congratulations, same problem.
• Early SuperMicro IPMI BMCs were notorious for doing wonky things with the network interface. Whether to use the onboard vs. dedicated IPMI port was often determined at power-on (not restart), and would not toggle from there. If you had a power outage and your switch didn't provide power quickly enough, you could end up with the IPMI failing to work because it autodetected the wrong setting.
• I've personally had lots of weird, unexplainable connectivity issues getting the sideband IPMI working reliably. Sometimes I simply couldn't ping the interface IP for a few minutes. Sometimes I'd get a storm of packets on the assigned VLAN, but the traffic all appeared to be dropped.

While this has nothing to do with sideband-vs.-dedicated, I'll also note that the tools for accessing host systems are very poorly written. Older IPMI cards don't support anything other than local authentication, making password rotation a total pain. If you're using the KVM-over-IP functionality, you're stuck using an improperly-signed, expired Java applet or a weird Java desktop application that only works on Windows and requires UAC elevation to run. I've found the keyboard entry to be spotty at best, sometimes getting "stuck keys" such that it's impossible to type a password to login without trying 10 times.

I've eventually managed to get 40+ systems working with this arrangement. I've got mostly newer systems I could VLAN the IPMI interfaces onto a separate subnet, and I mostly use the serial console via ipmitool which works very well. For the next generation of servers, I'm looking at Intel's AMT technology with KVM support; as this makes it into the server space, I can see replacing IPMI with this.