Wifi – Why the laptop sends ARP request to itself

arpnetworkingwifiwindows 7wireshark

I have just started to learn about protocols. While studying the packets in wireshark, I came across a ARP request sent by my machine to my own IP. Here is the details of the packet : 

  No.     Time        Source                Destination           Protocol Info
     15 1.463563    IntelCor_aa:aa:aa     Broadcast             ARP      Who has 192.168.1.34?  Tell 0.0.0.0

Frame 15: 42 bytes on wire (336 bits), 42 bytes captured (336 bits)
    Arrival Time: Jan  7, 2011 18:51:43.886089000 India Standard Time
    Epoch Time: 1294406503.886089000 seconds
    [Time delta from previous captured frame: 0.123389000 seconds]
    [Time delta from previous displayed frame: 0.123389000 seconds]
    [Time since reference or first frame: 1.463563000 seconds]
    Frame Number: 15
    Frame Length: 42 bytes (336 bits)
    Capture Length: 42 bytes (336 bits)
    [Frame is marked: False]
    [Frame is ignored: False]
    [Protocols in frame: eth:arp]
    [Coloring Rule Name: ARP]
    [Coloring Rule String: arp]
Ethernet II, Src: IntelCor_aa:aa:aa (aa:aa:aa:aa:aa:aa), Dst: Broadcast (ff:ff:ff:ff:ff:ff)
    Destination: Broadcast (ff:ff:ff:ff:ff:ff)
        Address: Broadcast (ff:ff:ff:ff:ff:ff)
        .... ...1 .... .... .... .... = IG bit: Group address (multicast/broadcast)
        .... ..1. .... .... .... .... = LG bit: Locally administered address (this is NOT the factory default)
    Source: IntelCor_aa:aa:aa (aa:aa:aa:aa:aa:aa)
        Address: IntelCor_aa:aa:aa (aa:aa:aa:aa:aa:aa)
        .... ...0 .... .... .... .... = IG bit: Individual address (unicast)
        .... ..0. .... .... .... .... = LG bit: Globally unique address (factory default)
    Type: ARP (0x0806)
Address Resolution Protocol (request)
    Hardware type: Ethernet (0x0001)
    Protocol type: IP (0x0800)
    Hardware size: 6
    Protocol size: 4
    Opcode: request (0x0001)
    [Is gratuitous: False]
    Sender MAC address: IntelCor_aa:aa:aa (aa:aa:aa:aa:aa:aa)
    Sender IP address: 0.0.0.0 (0.0.0.0)
    Target MAC address: 00:00:00_00:00:00 (00:00:00:00:00:00)
    Target IP address: 192.168.1.34 (192.168.1.34)

Here the sender's mac address is mine(Here I have hiden my mac address). target IP is mine. Why my machine is sending ARP request to itself? I found 3 packets of this type. There was no ARP reply for these packets. Can anybody explain me why it is?
(My operating system is windows-7. I am directly connected to a wifi modem. I got these packets as soon as I started my connection.)

I want one suggestion also. many places I read that RFC's are enough for study about protocols. I studied the RFC 826 on ARP. I personally feel that is not enough at all. Any suggestion regarding this? Is there more then 1 RFC for a protocol? I want to study about the protocols in very detail. Can anybody guide me for this? Thanks in advance.

Best Answer

This behavior is a very good way of finding a potential duplicate IP.

If your computer gets no answer, then it is the only one with that IP. If your computer gets an answer, there is another computer with the same IP which is a problem obviously.

Concerning RFCs, I find them horrible to read. I only use them for reference concerning specific problems. I have probably read just one from start to finish. The rest I read bits by bits. IMO, I find that the best way to learn about something is to pick up the O'Reilly or similar paper book and read it.

There can be more then one RFC for a single protocol. For example IPv6 has 10 different RFC just concerning transition mechanisms from IPv4 to v6. There are many others for such things as neighbor discovery. SCTP is covered by 4 RFC also.

Related Topic