Wifi – WLAN card as LAN interface

I had exactly the same problem.

After adding firewall rules from the bridge member interfaces to the bridge network it seems to work.

Cheers Cidi

You mention that you got it working with DCPH, meaning your IP settings is being served from your local DHCP server in pfsense.

My understanding is that you want to assign a static IP address to your enp3s0 network device.

sudo nano /etc/network/interfaces

At the bottom of this file add the following lines (adapt to suit your configuration):

iface enp0s3 inet static
      address 192.168.1.50
      netmask 255.255.255.0
      gateway 192.168.1.1
dns-nameservers 192.168.1.1

Enable the new configuration by restarting the networking service.

sudo systemctl restart networking

This way your Virtual Machine Host will be assigned static IP address 192.168.1.50, and all its' outgoing internet traffic will be routed via your Pfsense router. In addition, all DNS queries will directed to your PfSense (assuming this is your local DNS, else just add OpenDNS addresses 208.67.222.222 208.67.220.220 instead).