When I VPN into my corporate office I can access all of the resources just fine, as if I were in the office, with the exception of one server. While on the VPN I ping the server by name and get the outside public facing ip address of the server. They way I use the server, I have to use it by name as opposed to ip address.
How can I add a route in my Windows machine to temporarily resolve this issue? Lets say the outside address that is returned from the server when I am on the VPN is 48.48.48.48 and the gateway inside the office network is 192.168.1.1 and the inside address of the server I need to connect to is 192.168.1.200. How would I add the route? I have tried this route on every interface with no luck:
route add 48.0.0.0 MASK 255.0.0.0 192.168.1.200 IF 1
I have a co-worker who is on vacation that did make a static route in the Windows routing table work when he was having the same issue so I know it's possible. Suggestions?
Best Answer
You should run the command as administrator, I use my route commands as:
Could you try to run it as:
route add 48.0.0.0 MASK 255.0.0.0 192.168.1.200Please, if it doesn't work try to share
route printandipconfigoutput, it is posible that you have a routing overlaping between both interfaces.