dell-poweredgepower-supply-unitwindowswindows-server-2008
Is it possible to view power supply information of a remote Windows (2008) server? It's a Dell Poweredge R720
The physical server is in a remote location and I only have RDP access. I can't see anything looking at the system information.
Ideally I don't want to install any additional software.
Maybe this isn't possible?
openmanage is most useful for seeing the status of your raid, temps, etc that arn't available directly to the OS
Several of the drivers will improve performance/functionality over the default windows ones. Usually you want at least chipset, networking and graphics
Best Answer
Using OSMA would be the most convenient option (if this is pre installed on the machine). Another option would be to request IPMI access to the server and from iDRAC, you can read all the information needed for the PSU.
Another work around could be to boot your server into Rescue mode (linux envoierment) and check it from there:
dmidecode --> https://linux.die.net/man/8/dmidecode
https://www.unix.com/red-hat/244490-check-psu-status.html
Hope this helps you.
Best regards,
Adrian